Note in defense of Brazilian democracy.

Brazilian Materials Research Society (B-MRS) declares its total rejection of the serious aggression against democracy and the rule of law in our country, which took place yesterday in Brasília, with the invasion by terrorists of the headquarters of the three powers of the Republic.

B-MRS stands in solidarity with the Brazilian executive,, judiciary and legislative bodies in defense of the Federal Constitution, its values and principles.

It is essential to verify the facts and punish those responsible for terrorist acts, without amnesty, and with ‘Democracy forever’!

B-MRS Executive Board

B-MRS Newsletter. Year 9, issue 11.

 

To view in browser, click here.

cabecalho-news-natal-ing

Year 9, issue 11. December 22nd, 2022.

End-of-year message

In 2022, we returned to the ‘new normal’ with in-person activities interspersed with virtual ones and masks disappearing from our daily lives thanks to the vaccination of most of the population against Covid-19.

That is why we were able to meet again at our annual event in Foz do Iguaçu last September. The strength and resilience of our community were present at all times. Despite the lack of funding and difficult working conditions we had almost 1,200 participants and 22 partner companies present in Foz do Iguaçu! We hope that the celebratory cry of students at our traditional conference party can always be fulfilled: “Online event never again!”.

In 2023, we want science to be heard and respected with the changes to come in Brazil. However, as a scientific society, we will continue to fight and act together with our peers and the community in defense of education as a pillar for a fairer society, and of science and technological development as tools to achieve decent living conditions for the entire population.

An excellent end of the year to all! May we recharge our energies to overcome the many challenges ahead, hoping for a better country and a better world.

B-MRS Executive Board

XXI B-MRS Meeting
Maceió (Alagoas state, Brazil), October 1 to 5, 2023

maceio

Symposia call. 35 proposals were submitted by the community! In early 2023 we will release the final list of approved symposia.

Venue. The venue for the event will be the Ruth Cardoso Cultural and Exhibition Center, in the city of Maceió. Know more.

Chairmen. The general coordinators of the event are two professors from the Brazilian Federal University of Alagoas (UFAL) and research productivity fellows: Carlos Jacinto da Silva, from the Institute of Physics, and Mario Roberto Meneghetti, from the Institute of Chemistry and Biotechnology.

Events

– II Encuentro de Investigadores en Ciencia de Materiales. Montevideo (Uruguay). April 20 and 21, 2023. Website.

41st International Conference on Vacuum Ultraviolet and X-ray Physics (VUVX 2023). Campinas (Brazil). July 3 to 7, 2023. Website.

– XXI B-MRS Meeting. Maceio (Brazil). October 1st to 5th, 2023. Website.

4th International Brazilian Conference on Tribology (TriboBR). Vitória (Brazil). November 26th to 30th, 2023. Website.

Follow us on social networks

rodape-ingles-natal

Unsubscribe here if you don´t want to receive our newsletters anymore.

Year-end message.

natal-ing

In 2022, we returned to the ‘new normal’ with in-person activities interspersed with virtual ones and masks disappearing from our daily lives thanks to the vaccination of most of the population against Covid-19.

That is why we were able to meet again at our annual event in Foz do Iguaçu last September. The strength and resilience of our community were present at all times. Despite the lack of funding and difficult working conditions we had almost 1,200 participants and 22 partner companies present in Foz do Iguaçu!

We hope that the celebratory cry of students at our traditional conference party can always be fulfilled: “Online event never again!”. In 2023, we want science to be heard and respected, with the changes to come in the country. However, as a scientific society, we will continue to fight and act together with our peers and the community in defense of education as a pillar for a fairer society, and of science and technological development as tools to achieve decent living conditions for the entire population.

An excellent end of the year to all! May we recharge our energies to overcome the many challenges ahead, hoping for a better country and a better world.

B-MRS Executive Board

B-MRS Newsletter. Year 9, issue 10.

 

capa-ingles

Year 9, issue 10. December 9th, 2022.

Featured paper

Brazilian researchers prepared black titanium dioxide using a simple and scalable method and used this low-cost photosensitive nanomaterial as a photoanode in a fuel cell. The device was able to generate electricity, with very high efficiency, using organic compounds as fuel and sunlight as the energy source. The work was reported in ACS Applied Materials & Interfaces. Know more.

comunidade 560

If you are the author of high-quality scientific work, carried out wholly or mostly in Brazil and published in a journal with a high impact factor, and you want to publicize it in our community, contact us to have your paper considered in the monthly selection of the “Featured paper”: comunicacao@sbpmat.org.br.

XXI B-MRS Meeting
Maceió (Alagoas state, Brazil), October 1st to 5th, 2023

maceio

Call for symposia. Groups of researchers who want to organize a symposium on their research topic within the next B-MRS Meeting can submit a proposal by filling in a simple form. The call ends this Saturday, December 10th. Access the symposium submission form.

Venue. The venue for the event will be the Ruth Cardoso Cultural and Exhibition Center, in the city of Maceió. Know more.

Chairmen. The general coordinators of the event are two professors from the Brazilian Federal University of Alagoas (UFAL) and research productivity fellows: Carlos Jacinto da Silva, from the Institute of Physics, and Mario Roberto Meneghetti, from the Institute of Chemistry and Biotechnology.

Members

sergio rezende 260

Prof. Sergio Machado Rezende (UFPE), a founding member of B-MRS, is part of the science and technology team of the government transition. The group was tasked with carrying out a diagnosis of the area and proposing measures. Rezende was the Brazilian Minister of S&T (2005 – 2010), among other management positions, and has world-class production in Physics of Materials.

edvani 260

Prof. Edvani Curti Muniz (UTFPR, UFPI and UEM) is the new coordinator of the Materials Area at CAPES, the Brazilian federal agency in charge of the quality of graduate programs. His name was one of the five sent to CAPES by B-MRS in September of this year after consulting our members. Edvani has extensive experience in academic management positions and a solid scientific career.

ana flavia 260

Prof. Ana Flávia Nogueira (UNICAMP), member of the B-MRS Council, was admitted as a fellow of the Royal Society of Chemistry and elected a permanent member of the Brazilian Academy of Sciences – two peer recognitions for her scientific career and leadership. She has important contributions in emerging materials for solar cells and she heads the Center for Innovation on New Energies, which has near 300 researchers.

If you are a B-MRS member and want to share news about your professional activities in our community, please contact us: comunicacao@sbpmat.org.br.

Papers from the community

PVA

This work led by Prof. Helinando Pequeno de Oliveira (UNIVASF), a B-MRS member, describes the simple production of a low-cost flexible triboelectric nanogenerator based on PVA membranes with fibroin (material extracted from the silkworm). The device, which converts mechanical energy into electrical energy, is promising for use in wearable electronics. Go to the paper in Nano Energy: https://doi.org/10.1016/j.nanoen.2022.108035.

amine gas

This review article with authors of our Brazilian community was highlighted by ACS Sensors as one of the most read among those recently published. The text brings a review of the advances achieved in the last decade in amine sensors and points out ways to continue the development of these devices, which allow monitoring the quality of food and avoiding wastage. Access the article: https://doi.org/10.1021/acssensors.2c00639.

If you are the author of an impactful paper in the Materials area and wish to share it with our community, please contact us: comunicacao@sbpmat.org.br.

Manifestos

– B-MRS repudiated a recent decree of the federal government, which prohibited financial disbursements in the month of December, preventing the payment of around 200,000 student and postdoc scholarships. The Society sympathized with the scholarship holders at this difficult time and demanded the immediate recomposition of the budget.

Opportunities

– Open until December 15: Call for proposals to carry out experiments on Sirius, the new Brazilian laboratory of synchrotron light. Researchers from Brazilian and foreign institutions in Latin American and Caribbean countries can also request financial assistance for travel and lodging in Campinas. Know more.

– Opportunities for PhDs at the Center for Innovation on New Energies within a project on graphene and niobium oxide solar modules, to be carried out mainly at UNICAMP. Registration until December 16. Know more

– Open until February 15: Applications for the Erasmus Mundus Masters in Materials Science and Engineering AMASE – a joint program of universities in Germany, France, Spain, Italy, Austria and Sweden, with scholarships for the best students. Know more.

To follow the opportunities in the area, enter the B-MRS group on Linkedin.

Upcoming events

– 11th International Conference of the African Materials Research Society (AMRS2022 ). Dakar (Senegal). December 12th to 15th, 2022. Website.

– Webinar (In-)visibility of women in science: historical perspectives. Online. December 16, 2022. Website.

– II Encuentro de Investigadores en Ciencia de Materiales. Montevideo (Uruguay). April 20 and 21, 2023. Website.

41st International Conference on Vacuum Ultraviolet and X-ray Physics (VUVX 2023). Campinas, (São Paulo). July 3 to 7, 2023. Website.

Follow us on social media

rodape-ingels

Unsubscribe here if you don´t want to receive the B-MRS monthly newsletters anymore.

Featured paper: Black titanium dioxide for solar powered fuel cells.

TEM image of the new photosensitive material: self-doped black TiO2.
TEM image of the new photosensitive material: self-doped black TiO2.

Researchers from the Brazilian Federal University of Mato Grosso do Sul (UFMS) have developed a photosensitive nanomaterial that is very efficient to produce electricity from organic compounds used as fuel and sunlight as the energy source. The process, which is relatively clean and inexpensive, is carried out in a device called a photo fuel cell. In the work, the team used methanol (CH3OH) as fuel, a liquid alcohol that stores a large amount of energy and, when used, generates much less carbon emissions than fossil fuels. The compound has gained attention as a fuel for clean energy generation, mainly because it can be produced from biomass.

“The photo fuel cell developed in our work contains a simple technology capable of converting methanol into energy using only solar energy as an external driving force, operating with simple, stable, abundant materials free of noble metals, which makes the cost of the process considerably low compared to conventional fuel cells”, says Professor Heberton Wender, a corresponding author of the article that reports this advance in the journal ACS Advanced Materials and Interfaces.

Fuel cells are devices that directly convert the chemical energy of a fuel into electrical energy through electrochemical reactions, with low or zero carbon emissions. Used for decades to supply energy in satellites and spacecraft, fuel cells are already present in homes, businesses, industries and electric cars, and are becoming increasingly relevant in the face of the need to generate energy in the cleanest way possible to mitigate climate change. However, the materials needed to efficiently catalyze electrochemical reactions in fuel cell electrodes are generally based on expensive and scarce elements such as noble metals. Therefore, several alternatives are being investigated; among them, the development of fuel photocells.

In these devices, inexpensive photosensitive materials based on abundant elements help drive reactions through the electrons and holes they generate when excited by sunlight. One such material is titanium dioxide (TiO2). This compound, which is usually in the form of a white powder, is not easily degraded by light and is simple to prepare. However, it has an important limitation: it only absorbs ultraviolet radiation, failing to take advantage of other wavelengths that are also present in sunlight, such as the so-called visible light.

In this context, the initial idea was born for the work of the UFMS team, which was developed within Luiz Felipe Plaça’s doctorate under the guidance of Prof. Heberton. “We thought of using self-doped titanium dioxide, that is, with self-induced structural defects, using a simple, inexpensive process that can be easily scaled up in the future”, says the researcher. “That was when we decided to use heat treatment in a reducing atmosphere with small amounts of sodium borohydride (NaBH4)”, he details. The idea generated great results. The treatment made it possible to control the density of defects in the titanium dioxide nanoparticles and, in this way, increase their ability to absorb radiation, including part of the visible spectrum of sunlight. Furthermore, the material lost its characteristic white color and turned black.

The black titanium dioxide was placed on a transparent conductive glass substrate and used as the photoanode of the fuel cell. The photoanode is the component responsible for absorbing sunlight and transforming it into electrons and holes that will reduce oxygen and oxidize fuel, respectively, generating the desired electric current at the end of the process. With the black titanium dioxide photoanodes, the efficiency of the fuel cell showed a very considerable increase in its ability to produce electric current from methanol and solar energy. “The improved device, without the use of noble metals, showed a 2,000% increase in maximum output power”, says Professor Heberton. “This represents an impressive efficiency and puts self-doped titanium dioxide on the list of the most promising materials to be used as photoanodes in photocells fueled by methanol or alternative fuels such as ethanol, glycerol, other alcohols and even organic pollutants with higher molar mass”.

Operation of the fuel photocell and the role of the new photoanode.
Operation of the photo fuel cell and the role of the new photoanode.

As it can be supplied with organic pollutants – a possibility that was explored in other work by the team, the photocell could be used to decontaminate water without additional energy costs and even generate a little extra electricity for external use in low-power devices. “In a hypothetical scenario, it would be possible to purify water from effluents in rural properties while producing energy”, points out Professor Cauê Alves Martins, who is also a corresponding author of the ACS Applied Materials and Interfaces article.

In addition to the laboratory photocell, the authors prepared, with the new photoanode, a prototype of a small portable device: a microfluidic photo fuel cell. The device, which fits in the palm of a hand, can be produced in less than an hour at a cost of less than $2.00. To develop the prototype, the team had the participation of an undergraduate student in Physics Engineering  at UFMS, Pedro Lucas S. Vital, who, guided by Prof. Cauê, accepted the challenge of preparing the cell using a 3D printer. The device was also tested, with good results. Despite being a good prototype, the engineering of the device can yet be improved to increase the power density via scale out, with more devices operating together, comment Heberton and Cauê.

The work is the result of a well-established collaboration between two research groups at the UFMS Institute of Physics: Nano&Photon, coordinated by Professor Heberton Wender, and the Electrochemistry Research Group, led by Professor Cauê Alves Martins. Researchers from the Institute of Chemistry of São Carlos (IQSC-USP) also participated in the work.

Os autores do trabalho. A partir da esquerda: Luiz F. Plaça, Pedro L. S. Vital, Luiz E. Gomes, Antonio C. Roveda Jr., Daniel R. Cardoso, Cauê A. Martins, Heberton Wender.
The authors of the paper. From the left: Luiz F. Plaça, Pedro L. S. Vital, Luiz E. Gomes, Antonio C. Roveda Jr., Daniel R. Cardoso, Cauê A. Martins, Heberton Wender.

Paper reference: Black TiO2 Photoanodes for Direct Methanol Photo Fuel Cells. Luiz Felipe Plaça, Pedro-Lucas S. Vital, Luiz Eduardo Gomes, Antonio Carlos Roveda Jr., Daniel Rodrigues Cardoso, Cauê Alves Martins, and Heberton Wender. ACS Applied Materials & Interfaces. DOI: 10.1021/acsami.2c04802.

Corresponding authors contact: heberton.wender@ufms.br, caue.martins@ufms.br.

SBPMat newsletter: coverage of the XX B-MRS Meeting.

 

You received this e-newsletter because, at some point, you shared your email address with the Brazilian Materials Research Society. We have never provided nor will provide your data to other individuals or legal entities. However, if you wish to leave this list and, in this way, stop receiving the B-MRS Newsletter, please, click here.

20 encontro

Newsletter of the
Brazilian Materials
Research Society

Special Issue

Report of the XX B-MRS Meeting
Foz do Iguaçu – 25 to 29 of September, 2022

In numbers

  • More than 1,100 participants.

  • 60% men, 40% women.

  • 41.5% professionals, 42.5% graduate students, 11% undergraduate students and 5% exhibitors.

  • 29 countries in America, Europe, Asia, Africa and Oceania.

  • 23 Brazilian states, covering the 5 regions of the country.

  • About 1,200 works effectively presented within 22 symposia: more than 340 oral presentations, 750 posters and 100 invited lectures.

  • 27 students´contributions awarded.

  • Up to 13 rooms in simultaneous sessions.

  • 7 plenary lectures in addition to the memorial lecture.

  • 3 technical lectures by exhibitors.

  • 1 pre-event tutorial.

  • 22 sponsors – exhibitors.

Event report

The traditional account of the event, with some files of the presentations and photos. Access the report here.

NEWS 260 2.jpg

List of awarded students

The works and authors that received the awards from B-MRS, ACS and RSC for the best contributions presented by students at the event. Access the list and the photo album here.

premiação

XXI B-MRS Meeting:
call for symposium proposals

The XXI B-MRS Meeting will be held in Maceió from October 1st to 5th, 2023, coordinated by UFAL professors Carlos Jacinto da Silva and Mário Roberto Meneghetti. The call for symposium proposals and the nomination of plenary speakers for the event are now open. Know more.

MACEIÓ-260

 

CERTIFICATES.

The XX B-MRS Meeting participation and presentation certificates are available in the event system: https://www.eventweb.com.br/xxsbpmat/home-event/.

EVENT PHOTOS.

The main photos of the event (sessions, party, ceremonies, tributes), taken by the official photographer, for you to look at or download, organized by day, are available at Google Drive.

Follow us on social media

Call for symposia and suggestions of plenary speakers for the XXI B-MRS Meeting (Maceió, October 1st to 5th, 2023).

logo2023The call for symposium proposals to compose the XXI B-MRS Meeting is open until December 3rd this year. The event will be held from October 1st to 5th, 2023 in Maceió (Alagoas, Brazil), chaired by Professors Carlos Jacinto da Silva and Mario Roberto Meneghetti, from the Federal University of Alagoas (UFAL).

Proposals can be submitted by teams of researchers (Ph.D.), preferably of international composition, wishing to organize a symposium within the event on a research topic in the field of Materials Science and Technology – from the design, synthesis and characterization of materials to their applications in the most diverse segments. The list of approved final symposia will be published on December 16 this year.

To submit a symposium proposal, simply fill out, in English, the online form available at http://sbpmat.org.br/proposed_symposium/ .

In addition, the event’s organizing committee invites the community to send suggestions of plenary speakers (internationally renowned scientists who can give a motivational lecture on advances made over time in a particular research topic, as well as the challenges and perspectives for the future). The plenary lectures should interest a wide audience, with different levels of training and thematic specialties.

Suggestions for the plenary lectures must be submitted by November 20th of this year through this Google form.

XXI B-MRS Meeting website: https://www.sbpmat.org.br/21encontro/ .

Report of the XX B-MRS Meeting: the joy of a face-to-face meeting.

Every year, at the end of the meeting of the Brazilian Materials Research Society, the next year’s event is announced: its date, chairs and, most importantly, the city where it will be held. However, with Foz do Iguaçu, one of the most beautiful destinations in the world, things happened differently. The announcement was made in September 2019, but the event only took place three years later. The blame for the delay was, of course, the pandemic. In 2020, the meeting was postponed. In 2021, it was carried out in an online format, always under the coordination of Professor Gustavo Dalpian (UFABC), who skillfully dealt with the challenges of a difficult period. Finally, in September 2021, at the end of the online meeting, Professors Lucimara Stolz Roman (UFPR) and Marcela Mohallem Oliveira (UTFPR), were presented as the chairladies of the XX B-MRS Meeting, and announced what many expected: the event would be held in Foz do Iguaçu, the following year.

cataratas

This is how, after three years without face-to-face meetings, around 1,100 people from the five continents of the planet and the five regions of Brazil gathered in Foz do Iguaçu from September 25 to 29, 2022. “The twentieth meeting of B-MRS was very important for the materials community to meet in person again after the Covid-19 pandemic”, said Professor Lucimara. “The joy of the people, the students, especially those who were attending a face-to-face conference for the first time, was contagious”, expressed the chairlady.

Along that week, human warmth made up for the cold weather which was unusual for the season. And the event’s venue, the Rafain hotel’s convention center, perfectly accommodated the participants, allowing them to spend the whole day there without being exposed to the rain, and providing interactions, not only in the presentation rooms, but also in the large space that became an exclusive restaurant for the attendees, and in the wide corridor with tables and chairs that were always occupied by groups of researchers and students. Adjacent to the hotel’s garden, the corridor welcomed participants every morning to the sound of the song of several Atlantic Forest birds. Another environment of many exchanges was the space that comfortably contained the secretary, the 22 exhibitors’ stands, the coffee break tables and the posters. There, participants could circulate freely, satisfying their curiosity about the products and services for materials research that were exhibited or demonstrated in the stands, or exchanging scientific ideas with the posters´presenters.

expositor-corredor

“This exciting return to a face-to-face meeting with many participants was made possible not only by the fact that science won the battle of Covid, but also by the strength and resilience of our interdisciplinary community, which came to the event despite all the difficulties we face at the moment in the country”, said professor Mônica Cotta (Unicamp), B-MRS President.

And it is worth mentioning: the abundant face-to-face exchanges coexisted with virtual exchanges throughout the event. Hundreds of stories and posts from participants bubbled up on social media, extending the reach of face-to-face moments.

 

Emotions in the opening session

On Sunday, September 25, around 7:30 pm, around 900 people occupied the Amazônia room at the Rafain convention center. Number above expectations: several had to stand in the back of the room. The desire to participate was strong! “Looking at that event room with hundreds of people in the audience was so exciting for me, I had a unique feeling of happiness to have participated in this organization after the pandemic and to see that we were able to structure ourselves, to return to our normal”, said chairlady Lucimara.
pelanaria

We were in the twentieth edition of the B-MRS annual event, but it was the first time that gender parity was seen at the opening table. There were three women at the table, and in the leadership: the two chairs of the event and the B-MRS President. Besides them, Professors Rodrigo Martins (NOVA, Portugal) as president of the International Union of Materials Research Societies (IUMRS), Guillermo Solórzano (PUC-Rio) as leader of the creation of B-MRS and first President of the society, and Roberto Faria (IFSC-USP), honored with the Joaquim da Costa Ribeiro Memorial Lecture – a B-MRS distinction for researchers of the community with a long trajectory and solid contributions.

In her speech, the B-MRS President told a story that happened in the 1990s that reinforces the importance of representativeness in workplaces. Chairlady Lucimara, who was a student at the time, was at Unicamp participating in an event when she visited a laboratory coordinated by Mônica, who was starting her career as a research professor at the Institute of Physics Gleb Wataghin (IFGW). The young Lucimara was surprised to see, for the first time, a woman coordinating a lab of experimental physics, which made her think that a career in this area would be possible. Today, Lucimara coordinates a productive research group on physics of materials at UFPR, and Mônica is the director of the IFGW. At the end of her speech, the president took the opportunity to present and launch the new visual identity of B-MRS, developed to celebrate the society’s 21 years, conveying the strength, excellence, enthusiasm, cohesion and diversity of the Brazilian materials research community.

chairs abertura

In her presentation, Professor Lucimara called attention to the names of the rooms where the symposia would take place in the coming days: Rio de Janeiro, Foz do Iguaçu, Recife, Florianópolis, Natal, Guarujá, Ouro Preto, Gramado, Campos do Jordão, João Pessoa, Campinas, and Balneário Camboriú. For those who had not yet discovered the criteria behind the choice, she revealed that these were the names of the cities in which B-MRS meetings have already been held over the 20 editions. And “Amazônia”, the name of room for the plenary sessions? “The name of this room refers to the concern with sustainability that our scientific community has and needs to have”, she explained.

Then, in an presentation illustrated with many documents, Professor Solórzano told the story of the origins of B-MRS, emphasizing that the society was born with a proposal of interdisciplinarity and integration with the international scientific community. “In the first B-MRS Meeting we had 400 participants from 18 countries”, highlighted the founding partner.

Watch Guillermo Solórzano’s presentation:

Finally, Professor Gregório Faria (IFSC-USP) took the stage to introduce none other than his father, Professor Roberto Mendonça Faria, the main honoree of the night, who was president of B-MRS from 2012 to 2015. “It’s not easy for me talk about the Professor, the father, the grandfather”, said Gregório, moved, in the year that Professor Roberto turned 70 years old. “Something that makes me very proud is the way his peers treat him, which has to do with the fact that he always thinks about the community first,” said the son.

IMG_2639

In his presentation, following the characteristic approach of the memorial lectures, of recovering the memory of the Brazilian materials research, the honoree spoke about groups that participated in the beginnings of polymers research in Brazil: the Bernhard Gross Polymer Group (IFSC-USP), which Faria has been a part of since the 1970s when it was called Electrets Group, and two large national networks in the area of polymeric and organic materials, of which he was coordinator, the Multidisciplinary Institute of Polymeric Materials of the Millennium from 2002 and the National Institute of Organic Electronics since 2009.

During the lecture, Faria enthusiastically explained the main results achieved by these groups, which reflected the evolution of the area, from the study of insulating polymers and their application in the electret microphone, to research on electronic polymers and their use in electronic devices such as OLEDs and solar cells.

Watch Roberto Faria’s presentation:

 

From 8:00 pm on, the participants fraternized in a great opening cocktail, served in the convention center, where there was no lack of hugs, laughter, conversation… in short, the joy of a face-to-face reunion!

 

High academic and social impact science in plenary sessions

IMG_2190 The technical program began, once again, before the opening, on Sunday afternoon, with around 120 participants in the traditional “Young Researchers’ School”, a tutorial for young researchers on how to do high-impact science, from the initial idea (always audacious) to the difusion of the article on social networks, without forgetting the writing of the paper and the back and forth of the publication process. This edition of the tutorial also featured the novelty of advices for postdocs on how to continue their scientific career. The tutorial was given by Professor Valtencir Zucolotto (IFSC-USP), who is editor of the Nanomedicine and Nanotoxicology Book Series (Springer-Nature) and the journal Frontiers in Sensors/Biosensors (Frontiers), and by Daniel Staemmler, Executive Publisher at Elsevier in the field of Materials Engineering. The tutorial is based on practical tips and examples on technical and behavioral aspects of scientific practice.

More examples of high (or very high) impact science came throughout the week in the plenary lectures of the event, given by world-renowned scientists, which led participants to imagine a more or less near future, lead by techniques, materials and devices increasingly intelligent, efficient and sustainable. Held in the Amazônia room, the plenary sessions had 400 to 600 people in the audience. “Our scientific program was, once again, strong and diverse, bringing experts from around the world to cover frontier science. It motivated us to pursue quality science in Brazil and to use the results to improve quality of life of our population”, said Mônica Cotta.

IMG_3821 On Monday afternoon, Professor Christine Kranz showed the fantastic work of her group at the German University of Ulm (Einstein’s hometown). The group integrates different probe scanning techniques and adapts the instruments to study electrochemical processes while they are happening. The scientist, who is an associate editor of the journal Bioelectrochemistry (Elsevier), showed interesting results obtained with this instrumentation in the study of biofilms and antibacterial materials, catalysts for the production of hydrogen and new batteries.

IMG_4239 On Tuesday morning, Professor Daniel Ugarte (Unicamp) received the José Arana Varela Award. The distinction has been granted annually by B-MRS, since last year, to an outstanding researcher from the Brazilian materials research community, who delivers one of the plenary lectures at the B-MRS Meeting. A world-renowned expert in electron microscopy, Ugarte has distinguished himself in the study of the properties of nanosystems since the beginning of his career, when he was on the cover of the journal Nature as the sole author of an article on fullerene nanoonions. This was the starting point for a series of publications in this and other high-impact journals, such as Science, Nature Nanotechnology, Nano Letters and Physical Review Letters. “He never gives up on his ideals of research excellence and academic integrity,” said Mônica Cotta, who introduced the Ugarte plenary lecture and presented him with the award. But Professor Ugarte’s contribution to the materials community went beyond the papers. In the 1990s, he conceived and set up an open, multi-user electron microscopy laboratory within the Brazilian National Synchrotron Light Laboratory (LNLS), in Campinas. “Daniel’s crazy idea worked extremely well, providing excellent microscopists to the world and forming the basis of what is now known as the National Nanotechnology Laboratory at CNPEM”, highlighted Cotta.

In the lecture, Ugarte spoke passionately about the historical evolution of transmission electron microscopy, which today provides, in addition to images, a lot of quantitative information, and its impact on the study of nanomaterials and nanosystems. The presentation did not lack moments of great emotion when the scientist shared his affection and admiration for people in the community, such as Ricardo Rodrigues, one of the LNLS developers, who died in 2020.

Watch Daniel Ugarte’s presentation:

“Through the awards given to professors Faria and Ugarte, the community was able to express once again its gratitude to the researchers who dedicate their lives to materials science in Brazil”, highlighted professor Lucimara. “We have to value our scientists in order to strengthen our community”, she added.

IMG_4781_1On Tuesday afternoon, the plenary showcased materials science working closely with industry in manufacturing and materials processing. The speaker was Professor Sanjay Sampath, from the State University of New York at Stony Brook (USA), who directs a National Science Foundation (NSF) thermal spray research center, with a large participation of companies. With great enthusiasm, he presented efforts to improve this technique, which can be used to deposit coatings, mainly refractory ceramics, on large surfaces of various materials, with an impact on industries such as automotive, aerospace, energy, construction and prostheses, among others. The scientist, who carries out both fundamental and applied research, showed that apparent limitations of the technique can be transformed, through scientific research, into possibilities for new applications.

IMG_5008On Wednesday morning, the plenary speaker was a well-known member of the community, the former president of B-MRS Osvaldo Novais de Oliveira Junior (IFSC-USP). The speaker posed a thought-provoking question: can machines generate knowledge? Then he showed that, if computers still cannot transform information into knowledge, they already help a lot, even in the area of materials research. The scientist presented several works that use artificial intelligence tools, mainly machine learning, to analyze large volumes of data in order to discover materials with certain properties or to find papers of interest. In other cases, machine learning tools, coupled with good sensors built with the help of materials technology, make it possible to diagnose diseases using cheap and portable devices. According to the speaker, the next challenge for machines to actually generate knowledge is to understand human language. Physicist with a doctorate in Electronic Engineering and a productive career in the field of materials, Professor Osvaldo began his research on natural language processing in the 1990s from his interest in tools for scientific writing support. Over time, the scientist increasingly connected this research line to Physics and materials, especially in the development of sensors for the healthcare area. “How to teaching natural languages to machines is a very interesting issue for frontier research”, said the researcher, encouraging young people to work in the area.

See the presentation by Osvaldo Novais de Oliveira Junior:

IMG_5420The Wednesday afternoon plenary was delivered by Natalie Stingelin, professor and director of the School of Materials Science and Engineering at the Georgia Institute of Technology (USA). The scientist showed that plastics, which currently have a strong negative impact on the environment, can be our allies to build a more sustainable world. For that, she said, it is necessary to develop more and better smart electronic plastics, which combine, on the one hand, the flexibility, lightness and easy processing of polymers and, on the other hand, the properties needed for the desired applications. In her charming talk, Professor Natalie, who directs the Center for Photonics and Organic Electronics at Georgia Tech, presented a material of this type developed in her laboratory from a very simple chemical process for applications where it is important to control the passage of light. The material, which is an organic-inorganic hybrid, can be used, for example, in smart windows that keep environments at mild temperatures, avoiding energy expenditure on air conditioning. In addition to the applications, the material offers interesting possibilities for carrying out experiments that can further advance Photonics.

festa 2After three days of intense scientific programming, from 8:30 am to 7:30 pm, it was time for the traditional Conference Party, whose motto this year was the 20th anniversary of the B-MRS Meeting. The party, exclusively for event participants, was held at Dreams Motor Park, a space that is a bar, restaurant, concert hall and motorcycle museum. Participants of all ages and different geographical origins filled the house and made an unforgettable party. While on stage a rock band played classics of all times, on the dance floor and at the tables the excitement and the joy only increased. “What a lively party we had! It was a moment of relaxation and celebration of life”, expressed Professor Lucimara. A highlight was the participation on stage of a researcher from the community, Raphaela de Oliveira, who performed “Mercedes Benz”, by Janis Joplin. At the end of the event, the doctoral student would once again be highlighted by receiving one of the awards for the best student work.

IMG_6317The next day, at 10:30 am, the last plenary session of the event began. Professor Pulickel M. Ajayan (Rice University, USA) spoke about the challenges of nanoscale engineering and the industrial scale-up of its processes, in order to produce increasingly smaller and more efficient devices. Co-founder and director of Rice’s Department of Materials Science and NanoEngineering, Ajayan has a very high impact production in the field, with an h= 209 index on Google Scholar. The scientist emphasized the difficulty of dealing with the interfaces of nanoblocks. “It’s not just about building a Lego,” he said.

IMG_3032In addition to these technical-scientific plenary sessions, the event offered, early in the morning of the first day, a lecture on research, development and innovation funding in Brazil. The speaker was Marcelo Bortolini, Director of Scientific and Technological Development at FINEP, an organization of the Brazilian federal government devoted to funding of science and technology in the country. Bortolini showed the instruments that FINEP has to support the entire chain that generates technological innovation, from basic research to the launch of a product on the market. The speaker presented the financing possibilities, both reimbursable (loan) and non-reimbursable (grant) that FINEP offers to universities, research institutes, entrepreneurs, startups and companies.

Watch Marcelo Bortolini’s presentation:

A vibrant, competent and active community

About 1,200 research works were presented, in oral and poster sessions, within the 22 thematic symposia that made up the XX B-MRS Meeting. Organized by teams of researchers from Brazil and abroad, the symposia covered a variety of materials (glassy, ferroic, magnetic, superconducting, electronic polymers, two-dimensional materials, thin films) and their applications in areas such as health, energy, photonics, electronics, and environment. The event also featured 3 technical lectures on advanced materials characterization techniques, offered by scientific instrumentation companies.

Among the symposia, old acquaintances appeared, such as the thirteenth edition of the Brazilian glass and electroceramics symposia, as well as novelties, such as the symposium dedicated to new materials and nanotechnology for agribusiness. “As it was the first time that a symposium addressed this topic at the event, the organizers were positively surprised, both by the interest shown by the public and by the quality of the scientific works”, said Professor Valtencir Zucolotto (IFSC-USP), who was one of the organizers.

IMG_3175Once again, the symposia were thematic forums for the presentation of advances in the synthesis, characterization and application of materials, as well as in the experimental and computational techniques that make these advances possible. Not least, the discussion of the results from questions to the presenters was always stimulated. “In all the presentations, the public asked the speakers interesting questions, raising the scientific level of the event”, commented João Coelho, professor at Universidade Nova de Lisboa (Portugal), one of the organizers of the symposium P, which addressed sustainable materials and technologies for sensors and electronics. “The oral presentations promoted, as expected, interesting technical-scientific discussions between the audience and the presenters”, highlighted professor José Antonio Eiras (UFSCar), co-organizer of the symposium I on ferrous and multiferroic materials.

Researchers of all training levels, from undergraduate students to professors, performed the presentations of the thematic symposia. In total, there were more than 340 oral presentations and more than 750 posters. In addition, there were almost 100 invited lectures by leading experts from Brazil and abroad.

IMG_3985 While the presentations took place, the works that had applied for the student awards were evaluated. Committees set up by the organizers of each symposium classified the works following the criteria defined by the B-MRS award committee to, at the end of the event, define the list of winners of the Bernhard Gross Prize – a distinction granted by B-MRS to undergraduate, master’s or doctoral students who present the best oral and the best poster of each symposium. The award also involved Professors Ieda Garcia dos Santos (UFPB), B-MRS scientific director, Ivan Bechtold (UFSC), financial director of the society, and Maria Luiza Rocco Duarte Pereira (UFRJ). The trio was in charge of comparing the evaluations of all the finalists and choosing the best works from the entire event to receive the awards sponsored by journals from the American Chemical Society (ACS) and the Royal Society of Chemistry (RSC), which consisted, respectively, of R$2,000 and vouchers of £200 for each winning work, in addition to certificates.

As a result of this process, the delivery of prizes took place at the end of the event, just before noon on Thursday. In front of an audience of a few hundred people, Professor Ieda called to the stage, one by one, the finalists of the Bernhard Gross Awards: 27 students of all educational levels. Subsequently, the winners of the nine ACS Publications Prizes were announced, whose certificates were presented at the ceremony by the deputy editor of the magazine  ACS Applied Nano Materials, T. Randall Lee, and the five RSC Prizes, presented by Natalie Stingelin, who is editor-in-chief of both the Journal of Materials Chemistry C and Materials Advances.
premiação

Also at the closing ceremony, the chairlady Lucimara thanked the participants, the sponsors of the awards, the evaluation committees, the sponsors of the event (companies, funding agencies, ICTs), and the B-MRS team.

equipe

And in this cycle that always starts again, the awaited moment of the announcement of the next B-MRS Meeting arrived. The event will be held for the first time in Maceió, capital of the state of Alagoas, and for the fifth time in the Northeast region, from 1st to October 5, 2023. Professor Carlos Jacinto da Silva (UFAL), chair of the meeting with Professor Mário Roberto Meneghetti (UFAL), took the floor to present the event’s location, the Cultural and Ruth Cardoso Exhibitions, located in a central area of Maceió, close to the beach and many hotels, restaurants and leisure facilities.

Watch the presentation of the XXI B-MRS Meeting:

At the end of the closing ceremony, there were again long, strong hugs. Gradually, the participants left the Amazônia room, probably with the satisfaction of having participated in a very productive scientific event and the desire to repeat the experience in Maceió. “At the event we saw a lively, pulsating society, with a new generation of competent researchers committed to the development of science”, highlighted chairlady Lucimara. “I’m already excited for the next meeting in Maceió!!!”, she concluded.

XX B-MRS Meeting: Student Awards and Prizes.

Photos: the album of the Student Awards and Prizes Ceremony is available here.

Bernhard Gross Award

(Established by B-MRS in honor of Bernhard Gross, a pioneer of Brazilian materials research. It distinguishes the best oral and poster contributions presented by students in each symposium) 

bernhard gross

Symposium A – Poster. Gustavo Venâncio Bellucci. Development of curcumin-anchored hydroxyapatites.

Symposium A – Oral. Leonardo Francisco Gonçalves Dias. Evaluation of bisphosphonates adsorption on TiO2, HA and composite surfaces.

Symposium C – Poster. Caroline Eloisa Apolinário Botteon. Assessment of cytotoxicity of gold nanoparticles functionalized with Brazilian red propolis in 2D and 3D models of urological cancers.

Symposium C – Oral. Paulo Henrique Olivieri Jr. Cell-Surface Glycosaminoglycans Regulate the Cellular Uptake of Charged Polystyrene Nanoparticles.

Symposium E – Oral. Raphael F. Moral. Probing the Stacking Properties of Cesium Lead Halide Perovskite Nanoplates with SAXS.

Symposium F – Oral. Matheus F. F. das Neves. Aqueous conductive ink based on PEDOT nanoparticles without organic solvents, passivant agents or metallic residues.

Symposium G – Poster. Murillo Henrique de Matos Rodrigues. The Influence of the Magnetic Field and Nanoparticle Concentration on the Thin Film Colloidal Deposition Process of Magnetic Nanoparticles: The Search for High-Efficiency Hematite Photoanodes.

Symposium G – Oral. Rafael Lavagnolli Germscheidt. Water oxidation performance enhanced by electrochemically designed vacancies on Prussian blue catalyst.

Symposium H – Poster. Matheus Cavalcanti dos Santos Nunes. Thermoluminescence properties of Al2O3:C laser sintered ceramic under X-rays and beta irradiation.

Symposium H – Oral. Alexia Oliveira Silva. Thermoluminescence properties of alexandrite under beta, ultraviolet and X-ray irradiation.

Symposium J – Poster. Lucas Felipe Santos de Azeredo. Ferromagnets with minor magnetization loops that lie entirely and way outside the major hysteresis loop.

Symposium J – Oral. Allan Marciel Döring. The diffusion process of La, Fe and Si through the La(Fe,Si)13 phase – A Fick’s 1st law-based approach.

Symposium N – Oral. Mayara Carla Uvida. PMMA-silica coatings modified with calcium phosphates for bioactive corrosion protection of Ti6Al4V alloy.

Symposium P – Poster. Eduardo Fonseca Maia. Gold/Cooper and Silver/Cooper Mixed Nanoparticles Films on Silica Substrate: Materials With Potential Use in Optical Sensors.

Symposium P – Oral. Tomás Pinheiro. Paper-based, Green Laser-Induced Graphene for bioelectronic applications and electrochemical sensor production.

Symposium Q – Poster. Ana Carolina Cunha Serafim. Carbon dots obtained from two different agricultural residues.

Symposium R – Poster. Juliany Louise Hurbano Carvalho. Study of Self-Assembly Structures Based on Carbon Quantum Dots.

Symposium R – Oral. Ana Carolina Dalila Steil. PLA/PPy composite nanofibers by solution electrospinning for the development of electrochemical sensors.

Symposium S – Poster. Nicolli de Freitas. Simple, fast, and efficient electrochemical thinning of ultra-large MoS2 on gold surfaces.

Symposium S – Oral. Raphaela de Oliveira. Chlinoclore: probing water in an emergent naturally abundant 2D material.

Symposium T – Poster. Ezequiel Lorenzett. Electrostatic Charged Functional 3D Printed Materials.

Symposium T – Oral. Funsho Olaitan Kolawole. Nano-scratch and micro-scratch properties of CrN/DLC and DLC-W coatings.

Symposium U – Poster. Yan Araujo Santos da Campo. Elastomers and Chaos: an alternative approach to electromechanical coupling and its correlation with failure prediction.

Symposium U – Oral. Gustavo Scheid Prass. Processing and characterization of AISI 316L coating reinforced with Cu and CuO nanoparticles.

Symposium V – Poster. Thissiana da Cunha Fernandes. Determination of thermodynamic parameters for growth of lead-free piezoelectric single crystals from the melt.

Symposium V – Oral. Isabela Reis Lavagnini. In situ synchrotron X-ray diffraction of hydroxyapatite-zirconia composite during Conventional Sintering and Flash Sintering.

Symposium X – Oral. Yuri Ferreira da Silva. Effect of submerged liquid plasma treatment on the hygroscopicity of vegetable ivory microparticles.

ACS Publications PrizesACS 3

(Sponsored by journals of ACS Publications, a division of the American Chemical Society. Prizes for the best student contributions of all the event)

Symposium A – Poster. Gustavo Venâncio Bellucci. Development of curcumin-anchored hydroxyapatites.

Symposium G – Poster. Murillo Henrique de Matos Rodrigues. The Influence of the Magnetic Field and Nanoparticle Concentration on the Thin Film Colloidal Deposition Process of Magnetic Nanoparticles: The Search for High-Efficiency Hematite Photoanodes.

Symposium T – Poster. Ezequiel Lorenzett. Electrostatic Charged Functional 3D Printed Materials.

Symposium U – Poster. Yan Araujo Santos da Campo. Elastomers and Chaos: an alternative approach to electromechanical coupling and its correlation with failure prediction.

Symposium E – Oral. Raphael F. Moral. Probing the Stacking Properties of Cesium Lead Halide Perovskite Nanoplates with SAXS.

Symposium N – Oral. Mayara Carla Uvida. PMMA-silica coatings modified with calcium phosphates for bioactive corrosion protection of Ti6Al4V alloy.

Symposium P – Oral. Tomás Pinheiro. Paper-based, Green Laser-Induced Graphene for bioelectronic applications and electrochemical sensor production.

Symposium R – Oral. Ana Carolina Dalila Steil. PLA/PPy composite nanofibers by solution electrospinning for the development of electrochemical sensors.

Symposium S – Oral. Raphaela de Oliveira. Chlinoclore: probing water in an emergent naturally abundant 2D material.

RSC PrizesRSC

(Sponsored by journals of the Royal Society of Chemistry. Prizes for the best student contributions of all the event)

Symposium H – Poster. Matheus Cavalcanti dos Santos Nunes. Thermoluminescence properties of Al2O3:C laser sintered ceramic under X-rays and beta irradiation.

Symposium S – Poster. Nicolli de Freitas. Simple, fast, and efficient electrochemical thinning of ultra-large MoS2 on gold surfaces.

Symposium C – Oral. Paulo Henrique Olivieri Jr. Cell-Surface Glycosaminoglycans Regulate the Cellular Uptake of Charged Polystyrene Nanoparticles.

Symposium F – Oral. Matheus F. F. das Neves. Aqueous conductive ink based on PEDOT nanoparticles without organic solvents, passivant agents or metallic residues.

Symposium G – Oral. Rafael Lavagnolli Germscheidt. Water oxidation performance enhanced by electrochemically designed vacancies on Prussian blue catalyst.