08:30
09:30
| Plenary Session 1
Models for Heterogeneous Catalysts: Complex Materials at the Atomic Level08:30 - 09:30
Authors:
Hans-Joachim Freund
Presenter:
Hans-Joachim Freund
Room:
Plenary Room
|
10:45
11:15
| Coffee Break
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session 2
Bio-waste-derived nanofibers formed by solution blowing and their applications as biomedical materials and adsorbents for heavy metals removal from polluted water16:45 - 17:45
Authors:
A. L. Yarin
Presenter:
A. L. Yarin
Room:
Plenary Room
|
17:45
19:30
| Poster Session 1
E.P1.1 Spectroscopy characterization and DFT calculations Of Meldrum’s acid derivatives C14H16N2O4, C13H13NO5 and C13H13ClN2O617:45 - 19:30
Authors:
ANTUNES, J. A.; SANTOS, R. N.; TEIXEIRA, A. M. R.; TOLEDO, T. A.; FARIA, J. L.B.; BENTO, R. R. F.
Presenter:
ANTUNES, J. A.
Room:
Poster Session
|
08:30
09:30
| Plenary Session 3
Piezoelectric Films for Microelectromechanical Systems08:30 - 09:30
Authors:
Susan Trolier-McKinstry
Presenter:
Susan Trolier-McKinstry
Room:
Plenary Room
|
10:45
11:15
| Coffee Break
|
14:00
15:15
| Oral Session 3
E.OR3.1 Identification and detection of discontinuities in Friction Stir Welding joints by nondestructive testing14:00 - 14:15
Authors:
PERES, G. G.; FONSECA, E. B.; PEREIRA, V. F.; BUTTON, S. T.; LOPES, R. T.; DE OLIVEIRA, D. F.
Presenter:
PERES, G. G.
Room:
15-Fontana
E.OR3.3 The effect of preheating temperature on the microstructure and mechanical proprieties in welds of ca6nm martensitic steel14:30 - 14:45
Authors:
GUIMARAES, B. C.; SANTOS, M. T.; Muterlle, P. V.
Presenter:
GUIMARAES, B. C.
Room:
15-Fontana
E.OR3.4 Thermophysical characterization of materials involved in repair of hydroelectric turbines by the method of Differential Scanning Calorimetry (DSC) in different atmospheres14:45 - 15:00
Authors:
SANTOS, M. T.; MUTERLLE, P. V.; CARVALHO, G. C.; GUIMARAES, B. C.
Presenter:
SANTOS, M. T.
Room:
15-Fontana
E.OR3.5 Microstructural Characterization and Fatigue Behaviour of Weld Repaired AISI 4130 Aeronautic Steel Used in Critic Structures of Aircrafts15:00 - 15:15
Authors:
NASCIMENTO, M. P.; BATISTA, C. C.; VOORWALD, H. J. C.
Presenter:
NASCIMENTO, M. P.
Room:
15-Fontana
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session 4
Extreme Ultraviolet (EUV) Next Generation Lithography: Novel Patterning Materials-Progress and Challenges16:45 - 17:45
Authors:
Kenneth E. Gonsalves
Presenter:
Kenneth E. Gonsalves
Room:
Plenary Room
|
17:45
19:30
| Poster Session 2
E.P2.1 Critical analysis of standards and defects arising from aluminothermic welding17:45 - 19:30
Authors:
SCHIFINO, A. R.; REGULY, A.
Presenter:
REGULY, A.
Room:
Poster Session
E.P2.2 Characterization of Ti-Ni-Hf shape memory alloys17:45 - 19:30
Authors:
DE CASTRO, W. B.; SOARES, R. L.
Presenter:
DE CASTRO, W. B.
Room:
Poster Session
E.P2.3 Shape memory effect of stainless Fe-Mn-Si-Cr-Ni shape memory steel - Influence of heat treatment and chemical composition17:45 - 19:30
Authors:
SILVA, C. E.; MONTORO, S. R.
Presenter:
SILVA, C. E.
Room:
Poster Session
E.P2.4 The effect of tensile loading mode on the stress-corrosion cracking of UNSS3180317:45 - 19:30
Authors:
SOARES, L. R.; PEREZ TEIXEIRA, R. L.; DE LACERDA, J. C.; RENZETTI, R.; FERNANDES, A. M.
Presenter:
FERNANDES, A. M.
Room:
Poster Session
E.P2.5 Influence of the thermal variables on the microstructure in a horizontally solidified Al-Si-Mg alloy17:45 - 19:30
Authors:
BARBOSA, C. R.; LIMA, J. O.; MAGNO, I. A. B.; NASCIMENTO, J. M.; BARROS, A. S.; OLIVEIRA, M. C.; SOUZA, F. A.; ROCHA, O. L.
Presenter:
LIMA, J. O.
Room:
Poster Session
E.P2.6 Production of shape memory alloys with niobium binder element17:45 - 19:30
Authors:
CONCEIÇÃO, I. C.; DIAS, L. C.; FERNANDES, A. M.; F. Moura; LACERDA, J. C.; PEREZ TEIXEIRA, R. L.
Presenter:
CONCEIÇÃO, I. C.
Room:
Poster Session
E.P2.7 Synthesis of preferentially oriented Pt(100) nanoparticles directly supported on Carbon Vulcan for Direct Ethanol Fuel Cell application17:45 - 19:30
Authors:
ANTONIASSI, R. M.; SPINACÉ, E. V.; NETO, A. O.
Presenter:
ANTONIASSI, R. M.
Room:
Poster Session
E.P2.8 Investigation of Layered Double Hydroxides as nanocarriers of SbIII and quercetin targeting the alternative in the leishmaniasis chemotherapy17:45 - 19:30
Authors:
MENEZES, J. B.; GRILLO, L. A. M.; DORNELAS, C. B.; BARBOSA, V. T.
Presenter:
BARBOSA, V. T.
Room:
Poster Session
E.P2.9 Heat Transfer Coefficient at Metal-Mold Interface During Upward Transient Directional Solidification of an Al-Cu Alloy17:45 - 19:30
Authors:
COLLYER, M. N.; Wanzeler, K. R.; MACHADO, A. J.; NETO, J. M.; BARROS, A. S.; ROCHA, O. L.; FERREIRA, I. L.; MOREIRA, A. L. S.
Presenter:
COLLYER, M. N.
Room:
Poster Session
E.P2.10 Characterization of Primary Dendritic Arm Spacing of Al-3wt.%Cu Alloy Directionally Solidified Horizontally and Vertically Upwards17:45 - 19:30
Authors:
COLLYER, M. N.; MACHADO, A. J.; NETO, J. M.; BARROS, A. S.; AVIZ, J. A. S.; SILVA, A. P.; ROCHA, O. L.; MOREIRA, A. L. S.
Presenter:
COLLYER, M. N.
Room:
Poster Session
E.P2.11 Thermal reduction of the graphene oxide studied by x-ray diffraction in situ and Differential Scanning Calorimetry17:45 - 19:30
Authors:
REBELO, Q. H. F.; SOUZA, S. M.; LACERDA, D. I. S.
Presenter:
REBELO, Q. H. F.
Room:
Poster Session
E.P2.12 Study of the Influence of Mechanical Properties on the Microstructure of Metals in Mechanical Forming Processes17:45 - 19:30
Authors:
SANTOS, J. D.
Presenter:
SANTOS, J. D.
Room:
Poster Session
E.P2.13 Improvement mechanical properties of Ti3SiC2 using microwave-heating process17:45 - 19:30
Authors:
BORTOLOZO, A. D.; CALADO, L. D.; OSORIO,W.R.R
Presenter:
BORTOLOZO, A. D.
Room:
Poster Session
E.P2.14 Assessment of MAG welding processes via short circuit, controlled short circuit and pulsed arc metallic transfer in low-carbon steel17:45 - 19:30
Authors:
VALNIER, W. J.; TEIXEIRA, A.; VENTURINI, V. F.; ARNT, A. B.
Presenter:
VALNIER, W. J.
Room:
Poster Session
E.P2.15 Synthesis and characterization of full Heusler and half-Heusler alloys of the Ni-Ti-Si system by mechanochemistry and X-ray diffraction measurements17:45 - 19:30
Authors:
NOGUEIRA, I. M.; SOUZA, S. M.
Presenter:
NOGUEIRA, I. M.
Room:
Poster Session
E.P2.16 Evaluation of the thermal stability of polymer solutions based on polyacrylamide17:45 - 19:30
Authors:
OLIVEIRA, L. S.; OLIVEIRA, P. F.; Vieira, H. V. P.; COSTA, J. A.; MANSUR, C. R. E.; MOTA, L. S.
Presenter:
OLIVEIRA, L. S.
Room:
Poster Session
E.P2.17 Influence of the Interface on the Properties of ZnO/ZnX (X = Se, Te) Composites: A Theoretical Study via DFT+U17:45 - 19:30
Authors:
FLORES, E. M.; PIOTROWSKI, M. J.; M. L. Moreira
Presenter:
FLORES, E. M.
Room:
Poster Session
E.P2.18 Solute Content Affecting the Columnar to Equiaxed Transition in Al-Si Alloys During Horizontal Directional Solidification17:45 - 19:30
Authors:
MOREIRA, A. L. S.; SOARES, D. R.; RODRIGUES, J. A. F.; CARVALHO, D. B.; SILVA, A. P.; ROCHA, O. L.
Presenter:
SOARES, D. R.
Room:
Poster Session
E.P2.19 Effect of Secondary Dendritic Growth on the Microhardness of Directionally Solidified Al-11wt.%Si Alloy17:45 - 19:30
Authors:
MOREIRA, A. L. S.; SOARES, D. R.; RODRIGUES, J. A. F.; STIEVEN, G. M.; SILVA, A. P.; ROCHA, O. L.
Presenter:
SOARES, D. R.
Room:
Poster Session
E.P2.20 Evaluation of NiCrMo-3 alloy welded on low alloy steel 8630 with changing of welding temperature17:45 - 19:30
Authors:
COSTA, H. R.; Valente, W.D.A.; da Silva, M.V. S. da Silva; BACALTCHUK, C. M. B.; Oliveira, V. B.
Presenter:
Valente, W.D.A.
Room:
Poster Session
E.P2.21 Phase Transformations with Nucleation on Interfaces of Voronoi Cells17:45 - 19:30
Authors:
ALVES, A. L. M.; FONSECA, G. D.; BRAGA DA COSTA, M. F.; ROCHA, M. A.; ASSIS, W. L. S.; RIOS, P. R.
Presenter:
ALVES, A. L. M.
Room:
Poster Session
E.P2.22 Metalurgical and mechanical analysis of the welding process FHPP applied in stainless steel duplex SAF 220517:45 - 19:30
Authors:
LESSA, C. R. L.; MARTINAZZI, D.; FIGUEIREDO, A. P.; REGULY, A.; BUZZATI, D. T.
Presenter:
LESSA, C. R. L.
Room:
Poster Session
E.P2.23 Mechanical properties and characterization of Cu- Al and Cu-Zr alloys system17:45 - 19:30
Authors:
ROSIAK, C. A.; CHAD, V. M.; MEDEIROS, M. M.; COELHO, G. C.; NUNES, C. A.; SUZUKI, P. A.; PEREIRA, J. C.
Presenter:
ROSIAK, C. A.
Room:
Poster Session
E.P2.24 Mechanical and metalurgical qualification of welds produced by the process STITCH applied in stainless steel duplex SAF 220517:45 - 19:30
Authors:
MARTINAZZI, D.; LESSA, C. R. L.; FIGUEIREDO, A. P.; REGULY, A.; BUZZATI, D. T.; SCHEID, A.
Presenter:
MARTINAZZI, D.
Room:
Poster Session
E.P2.25 Laser Welding Applied to Complex Phase Steel17:45 - 19:30
Authors:
DIAS, E. X.; PEREIRA, M. S.; SILVA, A. F.
Presenter:
DIAS, E. X.
Room:
Poster Session
E.P2.26 Capillarity driven aluminum oxide microtubes17:45 - 19:30
Authors:
COUTINHO, I. T.; SOMBRIO, G.; NEVES, A. A.; SOUZA, J. A.
Presenter:
COUTINHO, I. T.
Room:
Poster Session
E.P2.27 Synthesis and optical properties of gold nanorods17:45 - 19:30
Authors:
CORDEIRO, N. J. A.; RENZI, W.; BOLOGNESI, R.; LAURETO, E.; LOURENÇO, S. A.; DUARTE, J. L.
Presenter:
CORDEIRO, N. J. A.
Room:
Poster Session
E.P2.28 Characterization and Study of the Microstructure and Mechanical Properties of the Perlite Gray iron and Ferritic Ductile Iron, after Heat Treatments17:45 - 19:30
Authors:
GUIMARÃES, B.; MARTINS, R.; BERNARDINO, F. C.; BRONDINO, O.; MUNHOZ. M. G. C.
Presenter:
MUNHOZ. M. G. C.
Room:
Poster Session
E.P2.29 Green synthesis of silver nanoparticles using red propolis of Alagoas17:45 - 19:30
Authors:
BARBOSA, V. T.; SOUZA, J. C.; MENEGHETTI, M. R.; LIMA-NETO, C. F.; GRILLO, L. A. M.; DORNELAS, C. B.; MENEZES, J. B.
Presenter:
BARBOSA, V. T.
Room:
Poster Session
E.P2.30 Effect of friction spot welding (FSpW) on the passive film of aluminum surface of the overlapping AA6181-T4/Ti-6Al-4V joints.17:45 - 19:30
Authors:
VACCHI, G. S.; PLAINE, A. H.; R. Silva; ALCÂNTARA, N. G.; SORDI, V. L.; Kuri, Sebastião E.; SUHUDDIN, U. F. H.; Della Rovere, C. A.
Presenter:
Della Rovere, C. A.
Room:
Poster Session
E.P2.31 Water splitting by 'Z scheme' using the BiVO4 for OER and Ta2O5 and/or TiO2 for HER sensitized with noble metal nanoparticles17:45 - 19:30
Authors:
GONÇALVES, H. B.; MACHADO, G.; GONZÁLEZ-MOYA, J. R.
Presenter:
GONÇALVES, H. B.
Room:
Poster Session
E.P2.32 Possible carbon structures in graphite nodules obtained from the SiC dissociation during sintering17:45 - 19:30
Authors:
BENDO, T.; BINDER, C.; HAMMES, G.; NEVES, G. O.; BIASOLI DE MELLO, J. D.; KLEIN, A. N.
Presenter:
NEVES, G. O.
Room:
Poster Session
E.P2.34 Ag@SiO2 nanoparticles for plasmon-enhanced spectroscopies and application in solar cells17:45 - 19:30
Authors:
OLIVEIRA, G. P.; QUIRINO, W. G.; SANTOS, M. J. L.; ANDRADE, G. F. S.
Presenter:
OLIVEIRA, G. P.
Room:
Poster Session
E.P2.35 Characterization of carbonaceous material isolated from barbecue chimney17:45 - 19:30
Authors:
ALMEIDA, M. E. S.; LACERDA, D. I. S.; REBELO, Q. H. F.; COUCEIRO, P. R. C.
Presenter:
REBELO, Q. H. F.
Room:
Poster Session
E.P2.36 Thermal evaluation of a recycled alloy of beverage cans during cold rolling process17:45 - 19:30
Authors:
STIEVEN, G. M.; SOARES, D. R.; SILVA, M. A. P. S.
Presenter:
STIEVEN, G. M.
Room:
Poster Session
E.P2.37 Thermosolutal convection behavior of an aluminum high alloy casting17:45 - 19:30
Authors:
STIEVEN, G. M.; SOARES, D. R.; OLIVEIRA, E. P.; LINS, E. F.
Presenter:
STIEVEN, G. M.
Room:
Poster Session
E.P2.38 Structural and mechanical evaluation of rapid solidified Fe-Nb-B ultrafine eutetic alloys17:45 - 19:30
Authors:
CANEDA, C. M.; Afonso, C.R.M.; Kiminami, C.S.; GARGARELLA, P.
Presenter:
CANEDA, C. M.
Room:
Poster Session
E.P2.39 Effect of the peroxide group on the reactivity of the surface of titanium oxide nanoparticles used to synthesize bismuth titanate powders at lower temperatures17:45 - 19:30
Authors:
FRANCATTO, P.; Camargo, E. R.; LEITE, E. R.
Presenter:
FRANCATTO, P.
Room:
Poster Session
E.P2.40 Modeling the Tempering Process of Quenched Steels Using Techniques of Artificial Neural Networks (ANN)17:45 - 19:30
Authors:
MELLO SILVA, R. S.; RODRIGUES, M. L.; DIACENCO, A. A.; OLIVEIRA, P. J.
Presenter:
MELLO SILVA, R. S.
Room:
Poster Session
E.P2.41 ZnO nanowires doping effects: first principle calculation17:45 - 19:30
Authors:
CASTALDONI, R. C.; COSMO, R.; BATISTA, C. V.; PORTUGAL, G. R.; ARANTES, J. T.
Presenter:
CASTALDONI, R. C.
Room:
Poster Session
E.P2.42 Processing and study of the alloy Mg-6Al-3La-1Ca submitted to the rheocasting process17:45 - 19:30
Authors:
ZIMPEL, I.; BARTEX, S. L.; Barcellos, V. K.
Presenter:
ZIMPEL, I.
Room:
Poster Session
E.P2.43 Characterization of API 5L-X80 Steel by Atomic Force Microscopy17:45 - 19:30
Authors:
COSTA, L.M. T.; CASTRO, N. A.; DAMASCENO, I. Z.; BUSCHINELLI, A. J. A.
Presenter:
CASTRO, N. A.
Room:
Poster Session
E.P2.44 Heat treatment of 1050 steel: quenching and tempering17:45 - 19:30
Authors:
NASCIMENTO, V. A.; SOUSA, P. A. A.; SOUSA, H. R.
Presenter:
NASCIMENTO, V. A.
Room:
Poster Session
E.P2.45 Investigation of Experimental Parameters of Barium Zirconate by Microwave17:45 - 19:30
Authors:
RATMANN, E. C.; Cristiane W. Raubach; CAVA, S.; Lilge, T.; Moreira, M. L.
Presenter:
RATMANN, E. C.
Room:
Poster Session
E.P2.46 Correlation of Mössbauer and Grazing Angle Synchrotron Diffraction for the characterization of Nitrided Austenitic Stainless Steel17:45 - 19:30
Authors:
Olzon-Dionysio, D.; DE SOUZA, S. D.; OLZON-DIONYSIO, M.; Campos, M.; MARTINEZ, L. G.; FABRIS, J. D.; ARDISSON, J. D.
Presenter:
Olzon-Dionysio, D.
Room:
Poster Session
E.P2.47 Microstructural evaluation and deformation behavior of Ti-Cu-4Fe alloys in the semisolid state17:45 - 19:30
Authors:
FREITAS, C. C.; CAMPO, K. N.; CARAM, R.
Presenter:
FREITAS, C. C.
Room:
Poster Session
E.P2.48 Crystallization behavior of (La0.5Ce0.5)60Al15Co25 alloy17:45 - 19:30
Authors:
ROCCO, G. C.; JORGE JUNIOR, A.M.; GARGARELLA, P.; ANTUNES, M. C.
Presenter:
ROCCO, G. C.
Room:
Poster Session
E.P2.49 Hydrolyzed collagen-based silver nanoparticles synthesis and evaluation of antibacterial activity17:45 - 19:30
Authors:
NASCIMENTO, E. A.; NOGUEIRA, S. S.; ARAUJO-NOBRE, A. R.; PLÁCIDO, A.; MAFUD, A. C.; GUIMARÃES, M. A.; ALVES, M. M. M.; CARVALHO, F. A. A.; ARCANJO, D. D.; MATOS, C. D.; EATON, P.; LEITE, J. R. S. A.; DA SILVA, D. A.; CARDOSO, V. S.
Presenter:
NASCIMENTO, E. A.
Room:
Poster Session
E.P2.50 Roughness evolution of metal/oxide interface in FeMnSiCrNi alloys cyclic oxidized17:45 - 19:30
Authors:
MAESTRO, C. A. R.; DOS SANTOS, R. F. C.; R. Silva; Della Rovere, Carlos A.; MALAFAIA, A. M. S.
Presenter:
MAESTRO, C. A. R.
Room:
Poster Session
E.P2.51 Microstructural changes during solution and aging heat-treatments of MAR-M246 superalloy17:45 - 19:30
Authors:
BALDAN, R.; SILVA, A. A.; NUNES, C. A.; COUTO, A. A.; GABRI, S. B.; ALKMIN, L.
Presenter:
BALDAN, R.
Room:
Poster Session
E.P2.52 Simulation versus analytical model in phase transformations by nucleation and growth17:45 - 19:30
Authors:
FONSECA, G. D.; ALVES, A. L. M.; BRAGA DA COSTA, M. F.; FERREIRA, J. L.; ASSIS, W. L. S.; P. R. Rios
Presenter:
FONSECA, G. D.
Room:
Poster Session
E.P2.53 Mechanical Behavior Assessment of Epoxy Based Adhesive17:45 - 19:30
Authors:
MARTINS, S. A.; TAPANES, N. O.; BOURGUIGNON, A. S.; ORLANDINI, L.; SILVA NETTO, C. A. M.
Presenter:
MARTINS, S. A.
Room:
Poster Session
|
08:30
09:30
| Plenary Session 5
Conjugated Polyelectrolytes in Biosensing and Disinfection08:30 - 09:30
Authors:
Kirk Schanze
Presenter:
Kirk Schanze
Room:
Plenary Room
|
09:45
10:45
| Oral Session 4
E.OR4.6 Comparative analysis between machinability and solidification conditions of Al-3wt%Si and Al-3wt%Cu alloys solidified in a horizontal directional device09:45 - 10:00
Authors:
LEAL, L. M.; Nascimento, J. M.; SILVA, C.V.; SILVA, S. L. P.; BARROS, A.; SILVA, A. P.
Presenter:
SILVA, A. P.
Room:
15-Fontana
E.OR4.7 Characterization of local strain structures in interstitial free steel by EBSD10:00 - 10:15
Authors:
CASTRO, N. A.; FERREIRA, J. L.; SOUZA, A. A.
Presenter:
CASTRO, N. A.
Room:
15-Fontana
E.OR4.8 Estudo das transformações de fase num aço inoxidável supermartensítico10:15 - 10:30
Authors:
CALDERÓN-HERNÁNDEZ, J.; MAGNABOSCO, R.; HINCAPIE-LADINO, D.; ALONSO-FALLEIROS, N.
Presenter:
CALDERÓN-HERNÁNDEZ, J.
Room:
15-Fontana
E.OR4.9 Cyclic Oxidation of FeMnSiCrNi shape memory alloys at high temperature10:30 - 10:45
Authors:
MALAFAIA, A. M. S.; MAESTRO, C. A. R.; DOS SANTOS, R. F. C.; R. Silva; Della Rovere, Carlos A.
Presenter:
MALAFAIA, A. M. S.
Room:
15-Fontana
|
10:45
11:15
| Coffee Break
|
11:15
12:30
| Oral Session 5
E.OR5.10 Microstructural characterization of high temperature laser remelted vermicular cast irons11:15 - 11:30
Authors:
SIQUEIRA, R. H.; CARVALHO, S. M.; LIMA, M. S.
Presenter:
LIMA, M. S.
Room:
15-Fontana
E.OR5.11 Al2O3/TiB2 composite as catalytic support for the catalytic combustion technology11:30 - 11:45
Authors:
Ana L. De Jesus Lazaro; Jorge Morales Hernández; Jose Manuel Juarez Garcia
Presenter:
Ana L. De Jesus Lazaro
Room:
15-Fontana
|
14:00
15:15
| Oral Session 6
E.OR6.13 An investigation on nanorough titanium oxide formed on pure titanium by anodization14:00 - 14:15
Authors:
SARICA, N.; UCISIK, A. H.; BINDAL, C.; YUGESWARAN, S.; OZTURK, Z. Z.
Presenter:
UCISIK, A. H.
Room:
15-Fontana
E.OR6.14 Ab-Initio Study of the Atomic Radius Role in the Structural Formation of the PtnTM55-n (TM = Y, Zr, Nb, Mo, and Tc) Nanoclusters14:15 - 14:30
Authors:
BATISTA, K. E. A.; DA SILVA, J. L. F.; PIOTROWSKI, M. J.
Presenter:
BATISTA, K. E. A.
Room:
15-Fontana
E.OR6.15 Influence of nanocrystals on the formation of shear bands in metallic glasses: a molecular dynamics study14:30 - 14:45
Authors:
TERCINI, M. B.; VEIGA, R. G. A.; ZÚÑIGA, A.
Presenter:
TERCINI, M. B.
Room:
15-Fontana
E.OR6.16 Study on the feasibility of using neural networks to predict machining parameters of Al-3wt%Si alloys14:45 - 15:00
Authors:
Silva, J. V.; Borges, E. L. M.; SILVA, M. A. P. S.; BARRADAS, B. R.; JUNIOR, P. L.; BOTELHO, T. I.
Presenter:
SILVA, M. A. P. S.
Room:
15-Fontana
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session 6
Biomimetic materials for antiwetting properties16:45 - 17:45
Authors:
Frédéric GUITTARD
Presenter:
Frédéric GUITTARD
Room:
Plenary Room
|
17:45
19:30
| Poster Session 3
E.P3.55 Synthesis and characterization of silver nanowires for transparent and flexible electrode applications17:45 - 19:30
Authors:
SOARES, F. B.; LOURENÇO, S. A.; CAVA, C. E.
Presenter:
SOARES, F. B.
Room:
Poster Session
E.P3.56 Identification and analysis of casting defect in brake collector17:45 - 19:30
Authors:
MUNHOZ, M. G. C.; HIGA, S. M.; ; OTONI, D.
Presenter:
MUNHOZ, M. G. C.
Room:
Poster Session
E.P3.57 Characterization of mechanical properties, microstructure and corrosion behavior of AISI 321H steel welded by tungsten inert gas process17:45 - 19:30
Authors:
MANFRINATO, M. D.; ROSSINO, L. S.; COTTING, F.; AOKI, I. V.; GOBBO, F. C.; MORETO, J. A.; BRANDI, S. D.
Presenter:
ROSSINO, L. S.
Room:
Poster Session
E.P3.58 XPS investigation of the decarburization process in a SAE 9254 Spring Steel17:45 - 19:30
Authors:
DE CASTRO, J. C. C. S.; ANTUNES, R. A.; SANTOS, S. F.
Presenter:
SANTOS, S. F.
Room:
Poster Session
E.P3.59 Study production of diamond-like carbon films on the Ti6Al4V alloy surface by using rf-PECVD method17:45 - 19:30
Authors:
SILVA, R. O.; Almeida, L. S.; MANFRINATO, M. D.; RANGEL, E. C.; CRUZ, N.; MORETO, J. A.; ROSSINO, L. S.
Presenter:
SILVA, R. O.
Room:
Poster Session
E.P3.60 Development of a multipurpose biaxial tensile device for in situ structural characterization using synchrotron light17:45 - 19:30
Authors:
BORDIN, A.; RODRIGUES, G. L. M. P.; GERALDES, R. R.; SBORZ, J.; SOARES, M. M.
Presenter:
BORDIN, A.
Room:
Poster Session
E.P3.61 Microstrutural Characterization of the interface between CuAg/Cu joint brazed with SnCu0,7Ni alloy17:45 - 19:30
Authors:
BAGNATO, O. R.; AMBROSIO, C.; CAPOVILLA, M. M.; ELISEI, F. S.; PIMENTEL, P. M.; KAKIZAKI, D. Y.
Presenter:
BAGNATO, O. R.
Room:
Poster Session
E.P3.62 Machinability Analysis of the Al-3%WtSi Alloy: Correlation Between Roughness And Solidification Microstructure17:45 - 19:30
Authors:
FIGUEIREDO, G. S.; GOMES, V. B.; Silva, J. V.; LEAL, L. M.; , R. S.; JUNIOR, P. L.; REIS, M. D.
Presenter:
GOMES, V. B.
Room:
Poster Session
E.P3.63 Development of a welding procedure for repairs in plastic injection matrixes17:45 - 19:30
Authors:
SOUZA, B. A.; SOLANO, L. A.; ; ROSSINO, L. S.; MORETO, J. A.; MANFRINATO, M. D.
Presenter:
SOLANO, L. A.
Room:
Poster Session
E.P3.64 Theorectical study on the electronic structures of M8, M = C, Si, Ge, and Sn17:45 - 19:30
Authors:
MORGON, N. H.
Presenter:
MORGON, N. H.
Room:
Poster Session
E.P3.65 A study about the effect of grain size on microforming fo the AA1050 aluminum17:45 - 19:30
Authors:
MORAES, E. C.; KLIAUGA, A. M.; GODOI, R. P.
Presenter:
MORAES, E. C.
Room:
Poster Session
E.P3.66 Induced phase transition in Ag nanocubes by high impact at hypersonic velocity17:45 - 19:30
Authors:
OLIVEIRA, E. F.; AUTRETO, P. A. S.; Galvão, D. S.
Presenter:
OLIVEIRA, E. F.
Room:
Poster Session
E.P3.67 Distinct gold-nanostructures synthesized in presence of chitosan17:45 - 19:30
Authors:
ROCHA, L. A.; SANTOS, M. C.; BARROS, H. R.; RIEGEL-VIDOTTI, I. C.
Presenter:
ROCHA, L. A.
Room:
Poster Session
E.P3.68 Characterization of ASTM A182 F22 steel samples employed in the petrochemical industry17:45 - 19:30
Authors:
Queiroz, S. R. S.; TAVARES, M. D.; DA COSTA, L. S.; GONÇALVES, F. D.
Presenter:
TAVARES, M. D.
Room:
Poster Session
E.P3.69 Microstructural evolution of Ti-30Nb-3Fe alloy during aging heat treatments correlated with mechanical properties17:45 - 19:30
Authors:
MELLO, M. G.; COSTA, F. H.; CARAM, R.
Presenter:
MELLO, M. G.
Room:
Poster Session
E.P3.70 NaTaO3 nanostructures: First Principles Calculation17:45 - 19:30
Authors:
PORTUGAL, G. R.; ARANTES JR., J. T.
Presenter:
PORTUGAL, G. R.
Room:
Poster Session
E.P3.71 Study of viscosity and thermical stabilty oil-in-water microemulsions for application in EOR17:45 - 19:30
Authors:
SILVA, J. V.; BRASIL. R.A.; COSTA, J. A.; MANSUR, C. R. E.
Presenter:
SILVA, J. V.
Room:
Poster Session
E.P3.72 Analysis of thermal stresses of vacuum brazed component using finite element method17:45 - 19:30
Authors:
ROSALES, M. J.; BAGNATO, O. R.; FERNANDES, M. A.
Presenter:
ROSALES, M. J.
Room:
Poster Session
E.P3.74 Effect of electron-surface scattering and thiol adsorption on the electrical resistivity of gold ultrathin films17:45 - 19:30
Authors:
HENRIQUEZ, R.; DEL CAMPO, V.; GONZÁLEZ-FUENTES, C. A.; CORREA, J.; MORAGA, L.; FLORES, M.; SEGURA, R.; DONOSO, S.; MARIN, F.; BRAVO, S.; HÄBERLE, P.
Presenter:
HENRIQUEZ, R.
Room:
Poster Session
E.P3.75 Structural and electronic study of complexes (1,10-phenanthroline)2 (NCS)2: a first principles approach17:45 - 19:30
Authors:
COSMO, R.; ARANTES, J. T.
Presenter:
COSMO, R.
Room:
Poster Session
E.P3.76 Characterizing nanocrystals by X-ray diffraction. The cases study of ZnO and (Gd,Er,Yb)-doped NaYF4 nanoparticles17:45 - 19:30
Authors:
ARAÚJO, J. C. R.; LORA-SERRANO, R.; IWAMOTO, W. A.; ESTEVEZ-RAMS, E.; ARAGON-FERNANDEZ, B.
Presenter:
ARAÚJO, J. C. R.
Room:
Poster Session
E.P3.77 Dielectric and structural properties of dopped strontium deficient bismuth excess Bismuth layered structured ferroelectric ceramics17:45 - 19:30
Authors:
BANERJEE, P.; FRANCO, A. J.
Presenter:
BANERJEE, P.
Room:
Poster Session
E.P3.78 Phase-property relationships in an annealed Cu-Al-Mn-Gd alloy17:45 - 19:30
Authors:
BRAZOLIN, G. F.; C. C. S. Silva; SILVA, L. S.; SILVA, R. A. G.
Presenter:
SILVA, L. S.
Room:
Poster Session
E.P3.79 Slant fracture surface in 7075 aluminum alloy tensile specimens17:45 - 19:30
Authors:
LOBO, R. M.; MORCELLI, A. E.; SOUZA, S. H.; PADILHA, A. F.; ANDRADE, A. H. P.
Presenter:
LOBO, R. M.
Room:
Poster Session
E.P3.80 Synthesis, Structural, Magnetic and Heating Efficiency Study of Iron Oxide Nanoparticles17:45 - 19:30
Authors:
POTTKER, W. E.; ONO, R.; SUZUKI, V. Y.; LA PORTA, F. A.; ODY, K. D.; GUARI, N.; DE PAULA, N. H.
Presenter:
POTTKER, W. E.
Room:
Poster Session
E.P3.81 Ni13 clusters oxygen chemisorption: an ab initio molecular dynamic investigation17:45 - 19:30
Authors:
SCHLEDER, G. R.; FAZZIO, A.; ARANTES JR., J. T.
Presenter:
ARANTES JR., J. T.
Room:
Poster Session
E.P3.82 Apparatus development for the treatment of plasma ionic nitriding in P20 steel17:45 - 19:30
Authors:
CRUZ, D. D.; , L. A.; PAIFER, S. K.; MANFRINATO, M. D.; RANGEL, E. C.; CRUZ, N.; MORETO, J. A.; ROSSINO, L. S.; ALVES, B. S.
Presenter:
ALVES, B. S.
Room:
Poster Session
E.P3.83 Structural and Morphological Properties of CoFe2O4 Nanoparticles Synthesized by Co-precipitation and Sol-Gel Method17:45 - 19:30
Authors:
GUARI, N. M.; POTTKER, W. E.; LA PORTA, F. A.; ONO, R.; JAICS, G. J.; COBOS, M. A.; DEL LA PRESSA, P.
Presenter:
GUARI, N. M.
Room:
Poster Session
E.P3.84 First principles Calculations of Lihtium Adsorption on graphene-like nanosctructures17:45 - 19:30
Authors:
DE MELO DOS SANTOS, L. H.
Presenter:
DE MELO DOS SANTOS, L. H.
Room:
Poster Session
E.P3.85 External RF Inductors with High Quality Factors using Gold, SU8 and Alumina17:45 - 19:30
Authors:
NASCIMENTO, A. S.; ALMEIDA, L. M. M.; ALEXANDRINO, R.; ANJOS, Angelica dos
Presenter:
ALMEIDA, L. M. M.
Room:
Poster Session
E.P3.86 Aluminum-silicon growth law considering the amount of solute in directional permanent mold casting17:45 - 19:30
Authors:
SOARES, D. R.; STIEVEN, G. M.; LOPES, J. T. B.
Presenter:
SOARES, D. R.
Room:
Poster Session
E.P3.87 Evaluation of the accumulated damage and fatigue life by rotating bending with different thermal treatments of Ti-6Al-4V alloy17:45 - 19:30
Authors:
SILVA, M. S.; SOUZA, R.C.; VARGAS, L. C.; DUARTE, R.N.
Presenter:
SILVA, M. S.
Room:
Poster Session
E.P3.88 Annealing temperature effect upon nickel ferrites nanoparticles: Structural, morphological and magnetic properties17:45 - 19:30
Authors:
ONO, R.; POTTKER, W. E.; GUARI, N.; LA PORTA, F. A.; SUZUKI, V. Y.; ODY, K. S.; DE PAULA, N. H.; JAICS, G. J.; COBOS, M. A.; DEL LA PRESSA, P.; FERRAZ, J.
Presenter:
ONO, R.
Room:
Poster Session
E.P3.89 Microstructure and microhardness evaluation of AISI/SAE 1045 steel from progressive increase on quenching and tempering temperature17:45 - 19:30
Authors:
SOARES, D. R.; STIEVEN, G. M.; FIGUEIREDO, L. S.; SOUSA, H. G. A. S.; SILVA, M. L. S.; DE OLIVEIRA, G. S. Q.; LOPES, J. T. B.
Presenter:
SOARES, D. R.
Room:
Poster Session
E.P3.90 Study of the influence of the topography in wettability states transition of nanostructured thin films17:45 - 19:30
Authors:
SCHIAVON, C. S.; JARDIM, P. L.; A. Gundel; M. L. Moreira; CAVA, S.; Cristiane W. Raubach
Presenter:
SCHIAVON, C. S.
Room:
Poster Session
E.P3.91 Structural and electronic properties of Ba(1-x)Ca(x)Ti(1-y)Zr(y)O317:45 - 19:30
Authors:
BATISTA, C. V.; ARANTES JR., J. T.
Presenter:
BATISTA, C. V.
Room:
Poster Session
E.P3.92 Kinetic curves of cementite spheroidization of steel used in heat exchanger17:45 - 19:30
Authors:
VIRGINIA, H. A.; OLIVEIRA, A.; ARNT, A. B.; DA ROCHA, M. R.; NASCIMENTO, R. V.
Presenter:
VIRGINIA, H. A.
Room:
Poster Session
E.P3.93 Advances in the optimization of surface modified titanium dioxide synthesis by the OPM route17:45 - 19:30
Authors:
SANTOS, E. M.; FRANCATTO, P.; Kubo, A. M.; GORUP, L. F.; SOUZA NETO, F. N.; Longo, E.; LEITE, E. R.; Camargo, Emerson R.
Presenter:
SANTOS, E. M.
Room:
Poster Session
|
08:30
09:30
| Oral Session 7
E.OR7.17 Prediction of quantum spin hall insulators using machine learning analytic tools: trends in the chemical space08:30 - 08:45
Authors:
MERA ACOSTA, C. A.; CARBOGNO, C.; OUYANG, R.; GHIRINGHELLI, L.; A. Fazzio; SCHEFFLER, M.
Presenter:
MERA ACOSTA, C. A.
Room:
15-Fontana
E.OR7.18 Study of rolled Fe-Ti alloys for using in electric machines08:45 - 09:00
Authors:
FULOP, G. O.; DIAS, M. B. S.; BORMIO-NUNES, C.
Presenter:
FULOP, G. O.
Room:
15-Fontana
E.OR7.20 Maxwell Wagner Dielectric Relaxation in Bismuth Layered Structured Ferroelectrics09:15 - 09:30
Authors:
BANERJEE, P.; FRANCO, A. J.
Presenter:
BANERJEE, P.
Room:
15-Fontana
|
08:30
09:30
| Plenary Session 7
NanoEngineered Materials: Challenges and Opportunities08:30 - 09:30
Authors:
Pulickel Ajayan
Presenter:
Pulickel Ajayan
Room:
Plenary
|
10:15
10:45
| Coffee Break
|