08:30
09:30
| Plenary Session
PS001.1 Green electronics: a technology for a sustainable future08:30 - 09:30
Authors:
FORTUNATO, E. M.
Presenter:
FORTUNATO, E. M.
Room:
Auditório
|
10:45
11:15
| Coffee Break
|
12:00
14:00
| Discussion Panel
RIG.1 Research in Germany12:00 - 14:00
Authors:
NEIDHARDT, M.
Presenter:
NEIDHARDT, M.
Room:
Araucária
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session
PS002.1 Smart Interfacial Materials from Super-Wettability to Binary Cooperative Complementary Systems16:45 - 17:45
Authors:
JIANG, L.
Presenter:
JIANG, L.
Room:
Auditório
|
08:30
09:30
| Plenary Session
PS003.1 Role of Atomic-Scale Modeling in Materials Design and Discovery08:30 - 09:30
Authors:
SINNOTT, S. B.
Presenter:
SINNOTT, S. B.
Room:
Auditório
|
10:45
11:15
| Coffee Break
|
12:00
14:00
| Discussion Panel
ME.1 Meet the Editors12:00 - 14:00
Authors:
OLIVEIRA JR, O. N.
Presenter:
OLIVEIRA JR, O. N.
Room:
Amoreiras II
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session
PS004.1 Innelastic light scattering in carbon nanostructures: from the micro to the nanoscale16:45 - 17:45
Authors:
JORIO, A.
Presenter:
JORIO, A.
Room:
Auditório
|
17:45
19:30
| Poster Session 1
K.P1.1 An Experimental Study of the Influence of Solidification Thermal Variables upon Microstructure of Al-Si-Cu Alloys17:45 - 19:30
Authors:
NASCIMENTO, M. S.; FRANCO, A. T. R.; NAKAMOTO, F. Y.; FRAJUCA, C.; SANTOS, G. A.; COUTO, A. A.
Presenter:
FRANCO, A. T. R.
Room:
Sala de pôsteres
K.P1.2 Investigation on sintering temperature of Aluminum Bronze alloy obtained by powder metallurgy with addition of niobium carbide17:45 - 19:30
Authors:
Dias, A. N. O.; Mendonça, C. S. P.; ALBERGARIA, L.; RODRIGUES, G.; MELO, M. L. N. M.; SILVA, G.
Presenter:
ALBERGARIA, L.
Room:
Sala de pôsteres
K.P1.3 Study of high energy milling time of the Aluminum Bronze alloy obtained by powder metallurgy with niobium carbide addition17:45 - 19:30
Authors:
Dias, A. N. O.; SILVA, A.; Mendonça, C. S. P.; RODRIGUES, G.; MELO, M. L. N. M.; SILVA, G.
Presenter:
Dias, A. N. O.
Room:
Sala de pôsteres
K.P1.4 Comparative study of application of lubrication in the machining gives nickel base superalloy (Inconel 718)17:45 - 19:30
Authors:
ALMEIDA, M. M.; RIBEIRO, M. V.; BARROS, R. A.; GAMA, R. P.
Presenter:
ALMEIDA, M. M.
Room:
Sala de pôsteres
K.P1.5 Gamma prime evolution during heat treatments of MAR-M246 superalloy17:45 - 19:30
Authors:
BALDAN, R.; SILVA, A. A.; NUNES, C. A.; COUTO, A. A.; GABRI, S. B.; ALKMIN, L.
Presenter:
BALDAN, R.
Room:
Sala de pôsteres
K.P1.6 Texture evolution in Deformed Zinc Alloys by Necae Method17:45 - 19:30
Authors:
VERNECK, P. R.; BOLMARO, R. E.
Presenter:
VERNECK, P. R.
Room:
Sala de pôsteres
K.P1.7 Parametrization of hot plastic deformation curves of AISI 316L austenitic stainless steel17:45 - 19:30
Authors:
FERREIRA, R. P.; REIS, G. S.; NASCIMENTO, C. C. F.; SANTOS, E. S.
Presenter:
FERREIRA, R. P.
Room:
Sala de pôsteres
K.P1.8 Creep evaluation of Ti-6Al-4V alloy with SiC thin film at 650 °C17:45 - 19:30
Authors:
SUGAHARA, T.; MARTINS, G. V.; MONTORO, F. E.; MASSI, M.; REIS, D. A.
Presenter:
SUGAHARA, T.
Room:
Sala de pôsteres
K.P1.9 ANALYSIS OF MACHINABILITY CORRELATED WITH AS-CAST STRUCTURE OF AN Al-1.2wt%Pb ALLOY SOLIDIFIED IN A HORIZONTAL DEVICE17:45 - 19:30
Authors:
KONNO, C. N.; BARRADAS, B. C.; SILVA, A. P.; SILVA, C. V. A.; JUNIOR, P. L.
Presenter:
KONNO, C. N.
Room:
Sala de pôsteres
K.P1.10 Microstructure and microhardness dependence on solidification thermal parameters of a wear resistant alloy from Al-Bi-Mg ternary system17:45 - 19:30
Authors:
MAZETTO, M. G.; COSTA, T. A.; SOARES, T.; BRITO, C.; CHEUNG, N.; GARCIA, A. .
Presenter:
MAZETTO, M. G.
Room:
Sala de pôsteres
K.P1.11 MICROSTRUCTURE AND HARDNESS OF HOT ROLLED SINTERED NITINOL17:45 - 19:30
Authors:
SILVESTRE, M. N.; FERRANDINI, P.
Presenter:
SILVESTRE, M. N.
Room:
Sala de pôsteres
K.P1.12 The Influence of Temperature of Work and Strain Rates upon Grain Size of the ASTM F138 alloy17:45 - 19:30
Authors:
SCHMITT, Y. P.; FIGUEIREDO, W.
Presenter:
SCHMITT, Y. P.
Room:
Sala de pôsteres
K.P1.13 Microstructural analysis of a tool steel AISI A2 submitted to different thermal routes, with and without plastic deformation.17:45 - 19:30
Authors:
MORAES, E. P.; CHRISTOVAM, R. V.; FERRANDINI, P.; XAVIER, R. Y.
Presenter:
MORAES, E. P.
Room:
Sala de pôsteres
K.P1.14 Comparison of carbon and stainless steel as filler metal in the welding of AISI 304 stainless steel and SAE 1020 carbon steel17:45 - 19:30
Authors:
Costa e Silva, L. G.; Silva, L. S.; SILVESTRE, M. N.; FERRANDINI, P.
Presenter:
Costa e Silva, L. G.
Room:
Sala de pôsteres
K.P1.15 Sintering characteristics and properties of Carbide WC-AISI316L (stainless steel) with carbon addition17:45 - 19:30
Authors:
AMANCIO, D. A.; TOLEDO, J. V.; CORREA, E. O.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.16 Use of Diffraction Electron backscatter technique in Microstructural Characterization of Materials17:45 - 19:30
Authors:
AMANCIO, D. A.; TOLEDO, J. V.; CORREA, E. O.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.17 WELDING FOR FSW (FRICTION STIR WELDING) OF THE ALUMINUM ALLOY 6063T6 USING A TOOL CIRCULAR17:45 - 19:30
Authors:
MESQUITA, W. M.; DA SILVA, K. R.; CASTRO, C. C.; TOLEDO, J. V.; AMANCIO, D. A.; PAULISTA, P. H.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.18 WELDING FOR FSW (FRICTION STIR WELDING) OF THE ALUMINUM ALLOY USING A CONICAL TOOL17:45 - 19:30
Authors:
MESQUITA, W. M.; DA SILVA, K. R.; CASTRO, C. C.; TOLEDO, J. V.; AMANCIO, D. A.; PAULISTA, P. H.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.19 Synthesis and Characterization of Bimetallic Nanoparticles17:45 - 19:30
Authors:
MOREIRA, L. R.; TADA, D. B.
Presenter:
MOREIRA, L. R.
Room:
Sala de pôsteres
K.P1.20 Horizontal transient solidification of Al-11wt.% Si alloy: correlation between columnar-to-equiaxed transition and thermal parameters17:45 - 19:30
Authors:
STIEVEN, G. M.; SOARES, D. R.; RODRIGUES, J. A. F.; ROCHA, O. L.; SILVA, M.A.P.S.; MOREIRA, A. L. S.
Presenter:
STIEVEN, G. M.
Room:
Sala de pôsteres
K.P1.21 Propagation behavior of adhesive joints under mode II fatigue loading using energy-balance approach17:45 - 19:30
Authors:
KENEDI, P. P.; ALVES, J. S.; DE BARROS, S.
Presenter:
ALVES, J. S.
Room:
Sala de pôsteres
K.P1.22 Creep behavior of the Ti-6Al-4V alloy with martensitic structure17:45 - 19:30
Authors:
Lacerda, I.R.S.; Gonçalves, F. A.R.; REIS, D. A. P.
Presenter:
REIS, D. A. P.
Room:
Sala de pôsteres
K.P1.23 The study of fatigue in bolts manufactured by different thermal treatments in Inconel 71817:45 - 19:30
Authors:
SILVA, T. M.; SOUZA, R.C.; SANTOS, G. A.
Presenter:
SILVA, T. M.
Room:
Sala de pôsteres
K.P1.24 The invar effect studied by time resolved x-ray diffraction17:45 - 19:30
Authors:
GALDINO, C. W.; GILES, C.; KONTOGIORGOS, G. N.; COELHO, L. N.; TASCA, K. R.
Presenter:
GALDINO, C. W.
Room:
Sala de pôsteres
K.P1.25 Metal characterization of drive shaft of a Starter-generator applied on helicopters17:45 - 19:30
Authors:
OLIVEIRA, D. R.; DE SOUZA, I. T.
Presenter:
DE SOUZA, I. T.
Room:
Sala de pôsteres
K.P1.26 The effect silicon element on the formation of the macrostructure of horizontally solidified multicomponent Al-Cu-Si alloys17:45 - 19:30
Authors:
OLIVEIRA, M. C.; MAGNO, I. A. B.; SOUZA, F. V. A.; NASCIMENTO, J. M.; ROCHA, O. L.
Presenter:
OLIVEIRA, M. C.
Room:
Sala de pôsteres
K.P1.27 Comparative analysis of relationship between microstructure and mechanical properties of austempered ductile cast iron.17:45 - 19:30
Authors:
BARACHO, L. L.; ; SILVA, F. R. F.; ALVES, V. C. C.; DA FONSECA, G. S.; LEAL, R. H.; Borges, P. A. C.; Silva, É. R.
Presenter:
BARACHO, L. L.
Room:
Sala de pôsteres
K.P1.28 Microstructural evolution and microhardness evaluation of Al-3.2wt.%Bi-3wt.%Ni ternary alloy and their correlation with solidification thermal parameters17:45 - 19:30
Authors:
SANTOS, P. F.; COSTA, T. A.; DIAS, M.; GRIZA, S.; CHEUNG, N.; GARCIA, A. .
Presenter:
SANTOS, P. F.
Room:
Sala de pôsteres
K.P1.29 Microstructure Evolution and Mechanical Properties of a Sn-Cu Lead Free Solder Alloy Solidified Under Transient Conditions17:45 - 19:30
Authors:
SOARES, T.; Kakitani, R.; DIAS, M.; Cruz, C.B.; GARCIA, A. .; CHEUNG, N.
Presenter:
SOARES, T.
Room:
Sala de pôsteres
K.P1.30 EXPERIMENTAL APPLICATION USING SHADOW MOIRÉ TECHNIQUE IN TENSILE TEST17:45 - 19:30
Authors:
FUJITA, I. K.; DALL FABBRO, I. M.; GAZZOLA, J.; KUROKAWA E SILVA, G.; DOS SANTOS, G. A.; NAKAMOTO, F. Y.; COUTO, A. A.
Presenter:
FUJITA, I. K.
Room:
Sala de pôsteres
K.P1.31 PROPOSAL OF MINIMUM CUTTING SPEED BY TEMPERATURE ANALYSIS FOR AN Al-3 wt% Si ALLOY17:45 - 19:30
Authors:
SILVA, J. V.; SILVA, H. P.; SILVA, S. D.; MENDES, D. S.; SILVA, A. P.
Presenter:
SILVA, J. V.
Room:
Sala de pôsteres
K.P1.32 ANALYSIS OF CUTTING TEMPERATURE IN FUNCTION OF CUTTING SPEED IN NECKING TEST OF AN Al-3.0wt%Si ALLOY17:45 - 19:30
Authors:
SILVA, J. V.; BOTELHO, T. I.; SENA, W. B.; SENA, W. J.; SILVA, A. P.
Presenter:
SILVA, J. V.
Room:
Sala de pôsteres
K.P1.33 Behavior of ASTM A588 Grade B rolled steel after conventional heat treatments: microstructure and microhardness17:45 - 19:30
Authors:
SOARES, D. R.; STIEVEN, G. M.; LOPES, J. T. B.
Presenter:
SOARES, D. R.
Room:
Sala de pôsteres
K.P1.34 Influence of microstructure on the mechanical behavior of a ternary Al-Cu-Ni alloy17:45 - 19:30
Authors:
RODRIGUES, A. V.; SANTOS, W. L.; BRITO, C.; GOULART, P. R.; GARCIA, A.; CHEUNG, N.
Presenter:
RODRIGUES, A. V.
Room:
Sala de pôsteres
K.P1.35 Corrosiveness of natural waters in industrial pipes in the South of Brazil17:45 - 19:30
Authors:
PETERS, S. R.; SILVA, S. N.; RODRIGUES, L. M.
Presenter:
PETERS, S. R.
Room:
Sala de pôsteres
K.P1.36 The effect of Na2B4O7.10H2O (Borax) in the formation of vanadium carbide (VC) layer on tool steels.17:45 - 19:30
Authors:
DAMM, D. D.; CONTIN, A.; FIGUEIREDO, K. A.; ANDRADE, A. E.; CAMPOS, R. A.; Trava-Airoldi, V. J.; BARQUETE, D. M.; CORAT, E. J.
Presenter:
DAMM, D. D.
Room:
Sala de pôsteres
K.P1.37 Influence of plastic deformation degree on aging time and mechanical properties of aluminium alloy AA202417:45 - 19:30
Authors:
SIQUEIRA, M. L.; MELO, M. L. N. M.
Presenter:
SIQUEIRA, M. L.
Room:
Sala de pôsteres
K.P1.38 Investigation on sintering temperature of 7075 T6 Aluminum alloy Obtained by powder metallurgy with addition of vanadium carbide17:45 - 19:30
Authors:
ALBERGARIA, L.; Mendonça, C. S. P.; Dias, A. N. O.; SILVA, G.; CORRÊA, E. O.
Presenter:
ALBERGARIA, L.
Room:
Sala de pôsteres
K.P1.39 Influence of a reactive Ni substrate on thermal parameters, microstructure and microhardness during directional solidification of the Sn-5.5wt.%Sb solder alloy17:45 - 19:30
Authors:
CURTULO, J. P.; Cruz, C.B.; DIAS, J. M.; COSTA, T. A.; SOARES, T.; Kakitani, R.; CHEUNG, N.; GARCIA, A.
Presenter:
CURTULO, J. P.
Room:
Sala de pôsteres
K.P1.40 Formation of pits in martensitic stainless steels at different tempering temperatures17:45 - 19:30
Authors:
MARIANO, N. A.; RUEDA, A. L.; Roveri, C.D.; SOUSA, L. L.; FERNANDES, M. C. S.; REZENDE, S.C.; Ferreira, G.V.; NAKAMATSU, S.
Presenter:
MARIANO, N. A.
Room:
Sala de pôsteres
K.P1.41 Investigation nickel-phosphorous black coating for solar absorber17:45 - 19:30
Authors:
CARLESSO, F; BERNI, L. A.; VIEIRA, L. E.; SAVONOV, G. S.; MIRANDA, E. L.
Presenter:
CARLESSO, F
Room:
Sala de pôsteres
K.P1.42 MACHINABILITY ANALYSIS OF THE COLUMNAR ZONE OF AN Al-7.0wt.%Si ALLOY SOLIDIFIED IN A HORIZONTAL DIRECTIONAL DEVICE17:45 - 19:30
Authors:
MONTEIRO JUNIOR; SILVA, A. P.; PRADO, I. R. S.; DA SILVA, C. P.; LEAL, L. M.
Presenter:
MONTEIRO JUNIOR
Room:
Sala de pôsteres
K.P1.43 Evaluation of the influence of cementation Solid and heat treatments on the hardness of the carbon steel17:45 - 19:30
Authors:
MAGNO, I. A. B.; BARROS, A. S.; SOUZA, F. V. A.; OLIVEIRA, M. C.; QUARESMA, J. M.; NASCIMENTO, J. M.
Presenter:
MAGNO, I. A. B.
Room:
Sala de pôsteres
K.P1.44 Evaluation of the thickness effect on the microstructure and microhardness of the aerospecial application alloy Ti-6Al-4V after different thermal treatments.17:45 - 19:30
Authors:
SILVA, M. S.; VARGAS, L. C.; SOUZA, R.C.; DUARTE, R.N.; NAKAMATSU, S.; MARIANO, N. A.
Presenter:
SILVA, M. S.
Room:
Sala de pôsteres
K.P1.45 Analysis of distortion and corrosion in welded structural profile steel17:45 - 19:30
Authors:
PEREIRA, J. P.; GONÇALVES, G. M.
Presenter:
PEREIRA, J. P.
Room:
Sala de pôsteres
K.P1.46 Correlation between Microstructure and Mechanical Properties of Al-Si-Cu Alloys Casting17:45 - 19:30
Authors:
NASCIMENTO, M. S.; FRANCO, A. T. R.; NAKAMOTO, F. Y.; FRAJUCA, C.; SANTOS, G. A.; COUTO, A. A.
Presenter:
FRANCO, A. T. R.
Room:
Sala de pôsteres
K.P1.47 The influence of the microstructure upon corrosion resistance of an Al-10wt% Si-5wt%Cu alloy17:45 - 19:30
Authors:
RIBEIRO, A. N.; SANTOS, G. A.; NAKAMOTO, F. Y.; KALLAS, C.; COUTO, A.A.; DE MELO, H. G.; HERNANDEZ, R. D.
Presenter:
RIBEIRO, A. N.
Room:
Sala de pôsteres
K.P1.48 The effect of the microstructure upon corrosion resistance of an Al-10wt% Si-2wt%Cu alloy17:45 - 19:30
Authors:
RIBEIRO, A. N.; KALLAS, C.; SANTOS, G. A.; NAKAMOTO, F. Y.; MORO, J. R.; COUTO, A. A.; DE MELO, H. G.
Presenter:
KALLAS, C.
Room:
Sala de pôsteres
K.P1.49 Optimization of Heat Treatment of Aluminum Alloys using techniques of Artificial Neural Networks (ANN)17:45 - 19:30
Authors:
OLIVEIRA, P. J.; MELO, M. L. N. M.; SILVA, R. S. M.; SANTOS, C. C. O.
Presenter:
OLIVEIRA, P. J.
Room:
Sala de pôsteres
K.P1.50 Study of mechanical properties and microstructure of a steel stainless duplex aged.17:45 - 19:30
Authors:
MACHADO, G. S.; ROCHA, R. H.; ELOY, F.; Rodrigues, C. A.; BARBORATI, A.; Mendonça, C. S. P.; MELO, M. L. N. M.
Presenter:
ROCHA, R. H.
Room:
Sala de pôsteres
K.P1.51 Validation of the relationship Hall-Petch for aluminum alloy 707517:45 - 19:30
Authors:
MEDINA, E. G.; SILVA, A.; QUINTERO, Y.F.; SILVA, A. A.; MELO, M. L. N. M.
Presenter:
MEDINA, E. G.
Room:
Sala de pôsteres
K.P1.52 Laser thermal treatment of DP600 and TRIP750 automotive multiphase steels17:45 - 19:30
Authors:
LAUAR, P. C.; Neves,D; LIMA, M. S.; RIVA, R.; MIYAKAWA, W .
Presenter:
LAUAR, P. C.
Room:
Sala de pôsteres
K.P1.53 Structural analysis of the rotor of a high speed turbogenerator17:45 - 19:30
Authors:
BENTO, R. T.
Presenter:
BENTO, R. T.
Room:
Sala de pôsteres
K.P1.54 Study of microstructural evolution of the alloy 2024 during homogenization17:45 - 19:30
Authors:
SILVA, A.; Rodrigues, C. A.; MEDINA, E. G.; SANTOS, J. M. P.; MELO, M. L. N. M.
Presenter:
SILVA, A.
Room:
Sala de pôsteres
K.P1.55 Effect of aging time at 475oC on the mechanical properties of a UNS S32304 Duplex Stainless Steel17:45 - 19:30
Authors:
GODEFROID, L. B.; ALMEIDA, E.W.R.; REIS, T.J.A.
Presenter:
GODEFROID, L. B.
Room:
Sala de pôsteres
K.P1.56 METAL ACTIVE GAS WELDING OF A HIGH-STRENGTH LOW-CARBON ALLOY (HSLA) 900 MPA: STUDY OF THE CORRELATION BETWEEN HEAT INPUT, MICROHARDNESS AND MICROSTRUCTURE17:45 - 19:30
Authors:
GARCIA, M. P.; MANTOVANI, G. L.; ANTUNES, R. A.
Presenter:
GARCIA, M. P.
Room:
Sala de pôsteres
K.P1.57 Tool wear analysis in finish milling of steel AISI 1045 using wiper geometry insert17:45 - 19:30
Authors:
TOLEDO, J. V. R.; RODRIGUES, C. A.; BALDIM, A. C.; SANTOS, M. C.; AMANCIO, D. A.; Costa, S. C.; FERREIRA, J. R.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.58 Analysis of surface finish after turning process of the steel AISI 52100 hardened17:45 - 19:30
Authors:
GOMES, J. E. M.; TOLEDO, J. V. R.; SANTOS, M. C.; MELO, M. L. N. M.; FERREIRA, J. R.; SILVA, G.
Presenter:
TOLEDO, J. V. R.
Room:
Sala de pôsteres
K.P1.59 Preparation of nano WC particles with addition of 316 L stainless steel by high energy milling17:45 - 19:30
Authors:
AMANCIO, D. A.; TOLEDO, J. V. R.; SENOS, A. R.; FERNANDES, C.M.; CORRÊA, E. O.
Presenter:
AMANCIO, D. A.
Room:
Sala de pôsteres
K.P1.60 Reuse of solid waste of rectifies of the piston rings by powder metallurgy17:45 - 19:30
Authors:
SANTOS, J. M. P.; SILVA, A.; SILVA, G.; MELO, M. L. N. M.
Presenter:
SANTOS, J. M. P.
Room:
Sala de pôsteres
K.P1.61 SYNTHESIS AND PURIFICATION OF METHYL- PHTHALOCYANINES COPPER17:45 - 19:30
Authors:
HIRANO, C. A. M.; CALEFI, P. S.; RIBEIRO, A. O.; SILVA, C. B.
Presenter:
HIRANO, C. A. M.
Room:
Sala de pôsteres
|
08:30
09:30
| Plenary Session
PS005.1 Organic Semiconductor Optoelectronics08:30 - 09:30
Authors:
SAMUEL, I. D. W.
Presenter:
SAMUEL, I. D. W.
Room:
Auditório
|
09:45
10:45
| Oral Session 1
K.OR1.1 Multiscale Modeling of Fracture and the Use of Subsize Specimens in Cleavage Fracture Assessments(Invited Lecture)09:45 - 10:15
Authors:
RUGGIERI, C.
Presenter:
RUGGIERI, C.
Room:
Amoreiras III
K.OR1.2 Fracture toughness assessment of two X80-5L-API steels with different microstructural features10:15 - 10:30
Authors:
CONDE, F. F.; AVILA DIAZ, J. A.; Rodríguez, J. F.; Franco, F.; PINTO, H. C.; RAMIREZ, A. J.
Presenter:
CONDE, F. F.
Room:
Amoreiras III
|
10:45
11:15
| Coffee Break
|
11:15
12:00
| Oral Session 2
K.OR2.1 Study on the applicability of Friction Stir Spot Welding of AA6060-T5 using the Taguchi method11:15 - 11:30
Authors:
AITA, C. G.; ROSENDO, T.; WIEDENHOFT, A. G.; GÓSS, I.; TIER, M. D.
Presenter:
AITA, C. G.
Room:
Amoreiras III
K.OR2.2 Accessing the endurance limit by a thermography method11:30 - 11:45
Authors:
BANDEIRA, C. F.; KENEDI, P. P.; CASTRO, J. T.
Presenter:
BANDEIRA, C. F.
Room:
Amoreiras III
K.OR2.3 Influence of Cubic Boron Nitride (CBN) content on the wear and tool life in PCBN tools for hardened steels machining applications.11:45 - 12:00
Authors:
GUIMARAES, M. G.; SANTOS, G. A.; NAKAMOTO, F. Y.; COUTO, A. A.
Presenter:
GUIMARAES, M. G.
Room:
Amoreiras III
|
12:00
14:00
| Discussion Panel
IN.1 Materials Research and Innovation12:00 - 14:00
Authors:
QUADROS, R.; FERRARESSI, A.; GRASSI, V.; MORI, M.
Presenter:
QUADROS, R.
Room:
Amoreiras II
|
14:00
16:15
| Oral Session 3
K.OR3.1 Influence of martensitic transformation and dislocation density on the hydrogen embrittlement in duplex stainless steel 220514:15 - 14:30
Authors:
HOYOS, J. J.; Rodríguez, J.; CRAIDY, P.; PAES, M. T. P.; TSCHIPTSCHIN, A.; RAMIREZ, A. J.
Presenter:
HOYOS, J. J.
Room:
Amoreiras III
K.OR3.2 Corrosion resistance of duplex stainless steel friction stir welds by potentiodynamic measurements and immersion tests.14:30 - 14:45
Authors:
SANTOS, T. F. A.; OLIVEIRA, L. A. S. C.; SILVA, D. L. A.; URTIGA FILHO, S. L.; RAMIREZ, A. J.
Presenter:
SANTOS, T. F. A.
Room:
Amoreiras III
K.OR3.3 EFFECT OF TITANIUM NITRIDE ON PITTING CORROSION IN A SUPERMARTENSITIC STAINLESS STEEL14:45 - 15:00
Authors:
RODRIGUES, C. A. D.; DUARTE, B. B.; BANDEIRA, R. M.; TREMILIOSI-FILHO, G.; Alberto M. Jorge Jr.
Presenter:
RODRIGUES, C. A. D.
Room:
Amoreiras III
K.OR3.4 Influence of Nb addition in γ/γʹ structure Co base superalloys15:00 - 15:15
Authors:
COSTA, A. M. S.; RAMIREZ, A. J.; NUNES, C. A.; LOPES, E.; Salgado, M. V.; TSCHIPTSCHIN, A. P.
Presenter:
COSTA, A. M. S.
Room:
Amoreiras III
K.OR3.5 Effect of Sb addition on the microstructure of Al-11wt.%Si alloy solidified under transient conditions15:15 - 15:30
Authors:
KAKITANI, R.; OBARA, T. J.; RAMOS, L. R.; GARCIA, A.; CHEUNG, N.
Presenter:
KAKITANI, R.
Room:
Amoreiras III
K.OR3.6 Characterization of dendritic microstructure and hardness of directionally solidified Al-Si-Ni eutectic alloy15:30 - 15:45
Authors:
KAKITANI, R.; COSTA, T. A.; BRITO, C.; GARCIA, A.; CHEUNG, N.
Presenter:
KAKITANI, R.
Room:
Amoreiras III
K.OR3.7 Microstructural characterization of the Sn-Al eutectic solder alloy unidirectionally solidified on AISI 1020 and nickel substrates.15:45 - 16:00
Authors:
OLIVEIRA JUNIOR, R. M.; DIAS, J. M.; Cruz, C.B.; COSTA, T. A.; SOARES, T.; GARCIA, A.; CHEUNG, N.
Presenter:
OLIVEIRA JUNIOR, R. M.
Room:
Amoreiras III
K.OR3.8 Decarburization process in a SAE 9254 Spring Steel: influence of heat treatment parameters16:00 - 16:15
Authors:
DE CASTRO, J. C. C. S.; SANTOS, S. F.; ANTUNES, R. A.
Presenter:
DE CASTRO, J. C. C. S.
Room:
Amoreiras III
|
16:15
16:45
| Coffee Break
|
16:45
17:45
| Plenary Session
PS006.1 Cooperative Function in Atomically Precise Nanoscale Assemblies16:45 - 17:45
Authors:
WEISS, P.
Presenter:
WEISS, P.
Room:
Auditório
|
17:45
19:30
| Poster Session 2
K.P2.1 Development of Annealing Parameter Process for Stress Relieving and Gas Nitriding for AISI 420 Steel Piston Rings17:45 - 19:30
Authors:
LAMOGLIA, M. S.; ; SILVA, G.
Presenter:
LAMOGLIA, M. S.
Room:
Sala de pôsteres
K.P2.2 Effect of Heat Treatment on Microstructure and Mechanical Properties of a Steel used in Cutlery17:45 - 19:30
Authors:
GODEFROID, L. B.; FARIA, G. L.; OLIVEIRA, L.L.T.; ALVARENGA, V.
Presenter:
GODEFROID, L. B.
Room:
Sala de pôsteres
K.P2.3 INFLUENCE OF AGING HEAT TREATMENT IN SIGMA PHASE FORMATION IN SUPERDUPLEX STAINLESS STEEL17:45 - 19:30
Authors:
CARDOSO, W. S.; ROMERO, R. H. P.; RIBEIRO, D. S.; CAMPANA, V. T.
Presenter:
CARDOSO, W. S.
Room:
Sala de pôsteres
K.P2.4 Structural and Magnetic Properties of MnFe2O4 Nanoparticles by the Co-precipitation Method under Different Conditions.17:45 - 19:30
Authors:
POTTKER, W. E.; DE LA PRESA, P.; ONO, R.; LA PORTA, F. A.; HERNANDO, A.
Presenter:
POTTKER, W. E.
Room:
Sala de pôsteres
K.P2.5 INFLUENCE ON HIGH ENERGY MILLING PROCESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A AISI 4340 ALLOY STEEL WITH NIOBIUM CARBIDE ADDITION17:45 - 19:30
Authors:
SANTOS, G. B.; Mendonça, C. S. P.; SILVA, A.; Dias, A. N. O.; SANTOS, V. A. R.; SILVA, G.
Presenter:
SANTOS, G. B.
Room:
Sala de pôsteres
K.P2.6 STUDY OF MAGNETIC PROPERTIES AND MICROSTRUCTURAL A INOX OBTAINED BY HIGH ENERGY MILLING17:45 - 19:30
Authors:
SANTOS, G. B.; da SILVA, M. R.; Mendonça, C. S. P.; ALBERGARIA, L.; MELO, M. L. N. M.; SILVA, G.
Presenter:
SANTOS, G. B.
Room:
Sala de pôsteres
K.P2.7 Structural and Morphological Properties of NiFe2O4 Nanoparticles Synthesized by Co-precipitation and Sol-Gel Method.17:45 - 19:30
Authors:
ONO, R.; POTTKER, W. E.; PRESA, P. D.; HERNANDO, A.; LA PORTA, F. A.; BAPTISTONE, G. F.; COBOS, M. A.; JAICS, G. J.
Presenter:
ONO, R.
Room:
Sala de pôsteres
K.P2.8 ELECTRICAL CONDUCTIVITY AND MICROSTRUCTURAL ANALYSIS OF COMPOSITE Cu-Ag-Cr-Al2O3 AFTER SINTERING ON POWDER METALLURGY PROCESSING17:45 - 19:30
Authors:
FONSECA, D. P. M.; MONTEIRO, W. A.
Presenter:
FONSECA, D. P. M.
Room:
Sala de pôsteres
K.P2.9 ROTARY FRICTION WELDING OF DISSIMILAR JOINTS AND BONDING INTERFACE CHARACTERIZATION BY EDX AND XPS17:45 - 19:30
Authors:
ALVES, E. P.; DOLLINGER, C. F. A; MARCUZZO, J. S.; BALDAN, M. R.; TOLEDO, R. C.; F. N. Piorino; AN, C. Y.
Presenter:
MARCUZZO, J. S.
Room:
Sala de pôsteres
K.P2.10 Real time analysis of anisotropic AuNps synthesis by Turkevich methods17:45 - 19:30
Authors:
PEREIRA, M.L.O.; GRASSESCCHI, D.; ; TOMA, H. E.
Presenter:
PEREIRA, M.L.O.
Room:
Sala de pôsteres
K.P2.11 Magnetic properties of a duplex stainless steel and its relation to the formation of sigma phase.17:45 - 19:30
Authors:
CIACCO, P. S.; Mendonça, C. S. P.; MELO, M. L. N. M.; da SILVA, M. R.; FIGUEIREDO, H. C.
Presenter:
CIACCO, P. S.
Room:
Sala de pôsteres
K.P2.12 Formation of Disordered Solid Solutions in High Entropy Alloys17:45 - 19:30
Authors:
RIOS, C. R.; GREGORIO, B. C.; SANTOS, W. D.
Presenter:
RIOS, C. R.
Room:
Sala de pôsteres
K.P2.13 COMPARISON OF THE PARTICLES SIZE OF X22 GRADE SUPERALLOY SCRAPS AFTER 60 HOURS OF MILLING WITH AND WITHOUT VANADIUM CARBIDE ADDITION17:45 - 19:30
Authors:
ALVES, R.; Rodrigues, C. A.; MENDES, J.; KUFFNER, B. H. B.; MELO, M. L. N. M.; SILVA, G.
Presenter:
ALVES, R.
Room:
Sala de pôsteres
K.P2.14 Thermal variables and primary dendrite arm spacing of al 10 wt% sn alloy directionally solidified17:45 - 19:30
Authors:
NASCIMENTO, J. M.; VASCONCELOS, A. J.; MAGNO, I. A. B.; OLIVEIRA, M. C.; SOUZA, F. V. A.; ROCHA, O. F. L.; SILVA, A. P.; BARROS, A. S.
Presenter:
NASCIMENTO, J. M.
Room:
Sala de pôsteres
K.P2.15 EVOLUTION OF PARTICLE MORPHOLOGY OF CHIP SERIES ALLOY X22 AFTER HIGH ENERGY MILLING17:45 - 19:30
Authors:
ALVES, R.; Rodrigues, C. A.; MENDES, J.; KUFFNER, B. H. B.; MELO, M. L. N. M.; SILVA, G.
Presenter:
ALVES, R.
Room:
Sala de pôsteres
K.P2.16 Comparative study of steel and polypropylene fibers reinforced concrete toughness factor in normal and aggressive environments17:45 - 19:30
Authors:
VASCONCELOS, R. E.; SILVA, K. R. M.; PINTO, J. B.; QUEIROZ, S. R. S.
Presenter:
VASCONCELOS, R. E.
Room:
Sala de pôsteres
K.P2.17 Correlation between the anisotropy properties (R and ΔR) and crystallographic texture of a microalloyed high-strength titanium steel, varying the annealing temperatures.17:45 - 19:30
Authors:
LEÃO, P. B.; ABREU, H. F. G.; GOMES DA SILVA, M. J.
Presenter:
LEÃO, P. B.
Room:
Sala de pôsteres
K.P2.18 Influence of using the technique of minimal quantity of fluid (MQF) during the milling process, in the microhardness of the hardened steel SAE 434017:45 - 19:30
Authors:
SOARES, L. R.; ALVES, M.C.S.; DAVID MUZEL, S.; CALLISAYA, E. S.; ALMEIDA, C. C.; SALUSSOLIA, G. F.; KONDO, M. Y.
Presenter:
SOARES, L. R.
Room:
Sala de pôsteres
K.P2.19 DILATOMETRIC STUDY OF PHASE TRANSFORMATIONS IN SAE 9254 SPRING STEEL DURING HEAT TREATMENT17:45 - 19:30
Authors:
SANTOS, S. L.; SANTOS, S. F.
Presenter:
SANTOS, S. L.
Room:
Sala de pôsteres
K.P2.20 Influence of iron contents on the tixoability of AA 35617:45 - 19:30
Authors:
ALVES, C.; BOAS, B.V; SEPTIMIO, R. S.; GATAMORTA, F.
Presenter:
BOAS, B.V
Room:
Sala de pôsteres
K.P2.21 Study of the milling process efficiency of the chips of duplex stainless steel UNS S31803 using vanadium carbide by high energy milling17:45 - 19:30
Authors:
Mendonça, C. S. P.; SANTOS, G. B.; MELO, M. L. N. M.; Ribeiro, V. A. S.; Oliveira, V. D.; SILVA, G.
Presenter:
Mendonça, C. S. P.
Room:
Sala de pôsteres
K.P2.22 Effect of solidification parameters on the microstructure of a Bi-Zn lead-free solder alloy17:45 - 19:30
Authors:
SEPTIMIO, R. S.; SANTOS, P. F.; COSTA, T. A.; VIDA, T. A.; GARCIA, A. .; CHEUNG, N.
Presenter:
SANTOS, P. F.
Room:
Sala de pôsteres
K.P2.23 REUSE OF CHIPS OF THE STAINLESS STEEL USING THE HIGH ENERGY MILLING -THE ANALYSIS OF EXPERIMENTAL FACTORS ON MILLING USING A FULL FACTORIAL DESIGN.17:45 - 19:30
Authors:
Mendonça, C. S. P.; MELO, M. L. N. M.; ALBERGARIA, L.; Dias, A. N. O.; GOMES, J. H. F; SILVA, G.
Presenter:
Mendonça, C. S. P.
Room:
Sala de pôsteres
K.P2.24 Secondary dendritic growth during upward vertical and horizontal directional solidification of Al-3wt.%Cu alloy castings17:45 - 19:30
Authors:
BARROS, A. S.; MONTEIRO JUNIOR; ALVES, N. D.; QUARESMA, J. M.; ROCHA, O. F. L.; MOREIRA, A. L. S.
Presenter:
BARROS, A. S.
Room:
Sala de pôsteres
K.P2.25 Feasibility of scaffold production using Ti-13Nb-13Zr alloy and naphthalene as space-holder17:45 - 19:30
Authors:
PINTO, P. M.; Komorizono, A. A.; Antonini, A.; RODRIGUES JR., D.
Presenter:
PINTO, P. M.
Room:
Sala de pôsteres
K.P2.26 Analysis of the microstructure development of the AA 7075 aluminum alloy after cold rolling process17:45 - 19:30
Authors:
PONTES, Á. P.; ALBERGARIA, L.; SILVA, G.
Presenter:
PONTES, Á. P.
Room:
Sala de pôsteres
K.P2.27 POROSITY OF STEEL X22 SINTERED AFTER 100 HOURS OF MECHANICAL ALLOYING WITH VANADIUM CARBIDE17:45 - 19:30
Authors:
KNYCHALA, M. S.; ALVES, R.; MENDES, J.; SILVA, G.
Presenter:
KNYCHALA, M. S.
Room:
Sala de pôsteres
K.P2.28 Processing of FeNiCrCuZn, FeNiCrCuZn(Nb)0,5, FeNiCrCuZnNb high entropy alloys by mechanical alloying17:45 - 19:30
Authors:
BEPE, A. M.; CARDOSO, K. R.
Presenter:
BEPE, A. M.
Room:
Sala de pôsteres
K.P2.29 Texture evolution of niobium single crystal processed by interrupted ECAE17:45 - 19:30
Authors:
BERNARDI, H. H.; SANDIM, H. R. Z.; BOLMARO, R. E.
Presenter:
BERNARDI, H. H.
Room:
Sala de pôsteres
K.P2.30 Wear performance of epoxy resin and alumina-epoxy composite coatings applied in SAE1020 steel substrate used on accessories for subsea umbilicals17:45 - 19:30
Authors:
OLIVEIRA, J. D.; GALDINO, A. G. S.; ROCHA, R. C.
Presenter:
OLIVEIRA, J. D.
Room:
Sala de pôsteres
K.P2.31 JATOBÁ Beamline - High Energy In Situ X-Ray Diffraction and Tomography17:45 - 19:30
Authors:
WU, L.; FONSECA, E. B.; TSCHIPTSCHIN, A.
Presenter:
FONSECA, E. B.
Room:
Sala de pôsteres
K.P2.32 Effect of heat treatments on the microstructure and hardness of a Ti-15Zr-xMo alloy.17:45 - 19:30
Authors:
XAVIER, C. C.; GRANDINI, C. R.; ROCHA, L. A.
Presenter:
XAVIER, C. C.
Room:
Sala de pôsteres
K.P2.33 INFLUENCE OF CUTTING PARAMETERS ON TOOL WEAR AND ROUGHNESS DURING THE PROCESS OF MACHINING OF STEEL STAINLESS MARTENSITIC AISI 41017:45 - 19:30
Authors:
DE PAULA, M. A.; RIBEIRO, M. V.; GAMA, R. P.
Presenter:
DE PAULA, M. A.
Room:
Sala de pôsteres
K.P2.34 Development and characterization of Ti-10Mo-25Zr alloys for biomaterial applications17:45 - 19:30
Authors:
SUÁREZ, G.; ARAÚJO, R. O.; GRANDINI, C. R.
Presenter:
SUÁREZ, G.
Room:
Sala de pôsteres
K.P2.35 Quantitative analysis to characterize the Complex Phase steel microstructure using chemical reagent Nital17:45 - 19:30
Authors:
DIAS, E. X.; PEREIRA, M. S.
Presenter:
PEREIRA, M. S.
Room:
Sala de pôsteres
K.P2.36 EVALUATION OF HEAT TRANSFER APPLIED TO THE WELDING OF DISSIMILAR METALS (ASTM A240-13C IN CARBON STEEL USI-AR-400)17:45 - 19:30
Authors:
COUGO, M. D.; MAGALHÃES, E. D.; SILVA, S. M.; Costa, S. C.; MELO, M. L. N. M.; SILVA, G.
Presenter:
COUGO, M. D.
Room:
Sala de pôsteres
K.P2.37 Effect of thermal cycling in microstructure and mechanical properties of CuAg/SN100C Alloy17:45 - 19:30
Authors:
BAGNATO, O. R.; PIMENTEL, P. M.; AMBROSIO, C.; Silva, F.; CAPOVILLA, M. M.; KAKIZAKI, D. Y.
Presenter:
BAGNATO, O. R.
Room:
Sala de pôsteres
K.P2.38 Optimization of machining Inconel 718 with carbide tool coated using the methodology of Taguchi.17:45 - 19:30
Authors:
PINHEIRO, C.; RIBEIRO, M. V.; ALVES, M.C.S.; KONDO, M. Y.
Presenter:
PINHEIRO, C.
Room:
Sala de pôsteres
K.P2.39 Synthesis and characterization of nanostructured silver from the mechanochemical reduction of Ag2O17:45 - 19:30
Authors:
DOS SANTOS, M. C. M.; TAKENO, M. L.; SOUZA, S. M.; MANZATO, L.
Presenter:
DOS SANTOS, M. C. M.
Room:
Sala de pôsteres
K.P2.40 Characterization Studies of β-Ti3O5 and λ-Ti3O5 nanoparticles17:45 - 19:30
Authors:
TASCA, K. R.; GILES, C.
Presenter:
TASCA, K. R.
Room:
Sala de pôsteres
K.P2.41 ADDITIVE MANUFACTURE WITH IN625 SUPERALLOY USING LASER AND PLASMA TRANSFERRED ARC17:45 - 19:30
Authors:
CARDOZO, E. P.; D'Oliveira, A. S. C. M.; GANGULY, S.;
Presenter:
CARDOZO, E. P.
Room:
Sala de pôsteres
K.P2.42 Evaluation of the formation and reversion of martensite induced by deformation in the austenite of a stainless steel lean duplex UNS S3230417:45 - 19:30
Authors:
De Vicente, R. B.; Oliveira, C. F. A; RODRIGUES, G.; Mendonça, C. S. P.
Presenter:
De Vicente, R. B.
Room:
Sala de pôsteres
K.P2.43 Zn2GeO4 nanostructure: Optical properties and photocatalytic applications17:45 - 19:30
Authors:
DE PAIVA, M. V.; BELÊ, I. R.; LIMA, M. P.; GHIRALDI, R. F.; POTTKER, W. E.; E. Longo; LA PORTA, F. A.
Presenter:
DE PAIVA, M. V.
Room:
Sala de pôsteres
K.P2.44 Preparation and Structural Characterization of Ti-25Ta-10Zr alloy for Biomedical Applications17:45 - 19:30
Authors:
QUADROS, F. F.; KURODA, P. A.; GRANDINI, C. R.
Presenter:
QUADROS, F. F.
Room:
Sala de pôsteres
K.P2.45 Aluminum 7075 turning analysis with polished carbide tools and coating titanium diboride17:45 - 19:30
Authors:
Stella Andreolli; ;
Presenter:
Stella Andreolli
Room:
Sala de pôsteres
K.P2.46 Synthesis and characterizations of magnetic Ni-20%at.Fe nanoparticles17:45 - 19:30
Authors:
PAGANOTTI, A.; GAMA, S.; SILVA, R. A. G.
Presenter:
PAGANOTTI, A.
Room:
Sala de pôsteres
K.P2.47 Study of the properties of cerium oxide on the depolymerization process of poly (ethylene terephthalate)17:45 - 19:30
Authors:
PEREIRA, A. D.; DA SILVA, E. A.; DE MELO, C. P.
Presenter:
PEREIRA, A. D.
Room:
Sala de pôsteres
K.P2.48 Synthesis and physical properties characterization of Magnetic Fe3O4 / Fe2O3 Microtubes17:45 - 19:30
Authors:
DÍAZ POMAR, C. A.; SOUZA, J. A.
Presenter:
DÍAZ POMAR, C. A.
Room:
Sala de pôsteres
K.P2.49 Magnetic phase diagram of thin terbium films17:45 - 19:30
Authors:
SALES, F. H.; SOUZA, I. A.; SOUZA MELO, J. J.
Presenter:
SALES, F. H.
Room:
Sala de pôsteres
K.P2.50 Heat Treatment Evaluation of Steel ASTM A-131 Grade A by X-Ray Diffraction17:45 - 19:30
Authors:
JUNIOR, F. F.; FEIO, L. G.; COSTA, E.S.; RODRIGUES, L.A.S.; BRAGA, E. M.
Presenter:
JUNIOR, F. F.
Room:
Sala de pôsteres
K.P2.51 Investigation of core-shell and microtube morphology formation of Co and Fe due to thermal oxidation17:45 - 19:30
Authors:
JANUSONIS, P. P.; SOUZA, J. A.; DÍAZ POMAR, C. A.; C. M. Rivaldo-Gomez
Presenter:
JANUSONIS, P. P.
Room:
Sala de pôsteres
K.P2.52 Comparative Evaluation The Use Of Babassu Oil In The Tempering Of A Steel Submitted To Termochemical Treatment17:45 - 19:30
Authors:
PRAXEDES, F. M.; TEIXEIRA, J. T.; CARDOSO, N.R.J.; ROCHA, O. L.; GONÇALVES, F. D.; SOARES, E. J. F
Presenter:
PRAXEDES, F. M.
Room:
Sala de pôsteres
K.P2.53 Comparative evaluation of different environments in stainless steel degradation used in orthodontic treatment17:45 - 19:30
Authors:
TEIXEIRA, J. T.; PRAXEDES, F. M.; FILHA, E. M.; CRUZ, A.; SOUZA, A.; SANTOS, E.M.N.; SANTOS, C. J.
Presenter:
TEIXEIRA, J. T.
Room:
Sala de pôsteres
K.P2.54 Study of anisotropy in automotive steels by means Finite Element Analysis and EBSD technique17:45 - 19:30
Authors:
SILVA, E. A.; PEREIRA, M. D.
Presenter:
PEREIRA, M. D.
Room:
Sala de pôsteres
K.P2.55 Influence of rapid solidification in the formation of intermetallic precipitates in AA319.0 aluminum alloy17:45 - 19:30
Authors:
FARINA, M. E.; DEDAVID, B. A.; SANTOS, P. B.
Presenter:
FARINA, M. E.
Room:
Sala de pôsteres
K.P2.56 Study of the ZnO for the Treatment Photocatalytic Wastewater.17:45 - 19:30
Authors:
GHIRALDI, R. F.; BELÊ, I. R.; DE PAIVA, M. V.; LIMA, M. P.; LA PORTA, F. A.
Presenter:
GHIRALDI, R. F.
Room:
Sala de pôsteres
K.P2.57 Pitting corrosion resistance of friction stir welded lean duplex stainless steel UNS S82441 evaluated by cyclic potentiodynamic polarization and critical pitting temperature (CPT)17:45 - 19:30
Authors:
LEITE, A. M. S.; TERADA, M.; FONSECA, E. B.; PEREIRA, V.; COSTA, I.
Presenter:
TERADA, M.
Room:
Sala de pôsteres
K.P2.58 Thermal and particle tracing simulation of a friction stir processed plates of API-5L-X80 steel.17:45 - 19:30
Authors:
GIORJAO, R. A.; ÁVILA, J. A.; FONSECA, E. B.; Rodríguez, J.
Presenter:
GIORJAO, R. A.
Room:
Sala de pôsteres
K.P2.59 Influence of Nb buffer layer on exchange coupling induced at Co/IrMn interface17:45 - 19:30
Authors:
MERINO, I. C.; PASSAMANI, E.; NASCIMENTO , V. P.; PELEGRINI, F.; BAGGIO-SAITOVITCH, E.
Presenter:
MERINO, I. C.
Room:
Sala de pôsteres
K.P2.60 Determination critical temperatures of the interstitial free steel: Tnr, Ar3 and Ar1 with continuous cooling multiple strains by hot torsion test17:45 - 19:30
Authors:
AMBO, H. A.; MACHADO, M. L. P.
Presenter:
AMBO, H. A.
Room:
Sala de pôsteres
K.P2.61 Solidification thermal parameters, microstructure and tensile properties of a ternary Al-10wt%Sn-5wt%Cu alloy17:45 - 19:30
Authors:
CAMPOS, A. A.; COSTA, T.; BERTE, F.; GARCIA, A.
Presenter:
CAMPOS, A. A.
Room:
Sala de pôsteres
K.P2.62 Study of the deformation and recrystallization process from an alloy of Al 4.5% Cu17:45 - 19:30
Authors:
GARCIA, B. G.
Presenter:
GARCIA, B. G.
Room:
Sala de pôsteres
K.P2.63 Corrosion resistance based on the microstructural array of an Al-3wt%Cu-1wt%Li alloy17:45 - 19:30
Authors:
ZURLO, M. N.; SANTOS, G. A.; CINTRA, E. P.; COUTO, A. A.; OSORIO,W.R.R; TORRESI, R. M.
Presenter:
ZURLO, M. N.
Room:
Sala de pôsteres
K.P2.64 Influence of different percentages of alumina addition in the high energy ball milling process of the AISI 52100 steel17:45 - 19:30
Authors:
KUFFNER, B. H. B.; SILVA, G.; Rodrigues, C. A.; RODRIGUES, G.
Presenter:
KUFFNER, B. H. B.
Room:
Sala de pôsteres
K.P2.65 Influence of the alumina addition in the wear resistance of the sintered AISI 52100 steel17:45 - 19:30
Authors:
KUFFNER, B. H. B.; SILVA, G.; Rodrigues, C. A.; RODRIGUES, G.
Presenter:
KUFFNER, B. H. B.
Room:
Sala de pôsteres
|
08:30
10:15
| Oral Session 4
K.OR4.1 CHARACTERIZATION OF METAL NANOPARTICLES OF GOLD, SILVER, COPPER AND SILVER-PALLADIUM ALLOY STABILIZED IN CHITOSAN. BACTERICIDE PROPERTIES\08:45 - 09:00
Authors:
CARDENAS, G.; SAAVEDRA, P.; VERGARA, L.; KLAHN, H. A.
Presenter:
CARDENAS, G.
Room:
Amoreiras III
K.OR4.2 Determining the diameter of silver nanoclusters via in situ capacitance measurements09:00 - 09:15
Authors:
OIKO, V.T.A.; HENSEL, R. C.; RODRIGES, K. L.; Varlei Rodrigues
Presenter:
OIKO, V.T.A.
Room:
Amoreiras III
K.OR4.3 Simple one-step green synthesis of gold nanoparticles with controlled size using imidazolium ionic liquid as ligand09:15 - 09:30
Authors:
SUZANA, A. F.; PULCINELLI, S. H.; SANTILLI, C. V.; BLANCHANDIN, S.; BRIOIS, V.; MENEAU, F.
Presenter:
SUZANA, A. F.
Room:
Amoreiras III
K.OR4.4 Structural characterization of silver nanoparticles09:30 - 09:45
Authors:
GARCIA, P. R.; Sousa, E. C. P.; PONTUSCHKA, W. M.; OLIVEIRA, C. L. P.
Presenter:
GARCIA, P. R.
Room:
Amoreiras III
|
10:15
10:45
| Coffee Break
|
10:45
11:45
| Plenary Session
PS007.1 The Versatility of Mesoscopic Solar Cells10:45 - 11:45
Authors:
HAGFELDT, A.
Presenter:
HAGFELDT, A.
Room:
Auditório
|
Register
Abstract Submission
FAPESP Application
Manuscripts publicationXV Brazil-MRS Meeting - publication of contributed manuscripts
The Brazilian Materials Research Society (SBPMat) and the Institute of Physics (IOP) have extended the collaboration from previous years. In 2016, authors of contributions presented at the XV Brazil-MRS Meeting will be able to submit manuscripts to peer review evaluation in a longer list of IOP scientific journals, which now includes nine titles.
After undergoing the standard IOP review process, papers accepted for publication will be posted in an online compilation dedicated to SBPMat. Today 13 papers presented at the XIV B-MRS meeting, in 2015, have been published and feature now in this collection. More information on the submissions will be announced soon on the website of the XV Brazil-MRS Meeting and SBPMat newsletter.
List of IOP journals included in 2016:
- 2D Materials
- Biomedical Materials
- Biomedical Physics and Engineering Express
- Journals of Physics: Condensed Matter
- Journals of Physics D: Applied Physics
- Materials Research Express
- Nanotechnology
- Semiconductor Science and Technology
- Modelling and Simulation in Materials Science and Engineering
Symposium System
Posters Printing Service
Important Dates
Symposium proposal submission
Until February 11th
Abstract submission
Until May 30th
Until June 15th
Notification of the abstracts status
July 12thAll Authors will recive an e-mail informing the Abstract status
Regarding the 'needs modification' status, only ONE new version will be accepted.
The system will be open to upload this new version until July, 17
Deadline for abstracts modifications
July 21th
Notification of the accepted abstracts
July 22th
Deadline for extended abstracts
Until August 22th
About Campinas